安卓MonkeyRunner源码分析之与Android设备通讯方式
如前文《谁动了我的截图?--Monkeyrunner takeSnapshot方法源码跟踪分析》所述,本文主要会尝试描述android的自动化测试框架MonkeyRunner究竟是如何和目标设备进行通信的。
在上一篇文章中我们其实已经描述了其中一个方法,就是通过adb协议发送adb服务器请求的方式驱动android设备的adbd守护进程去获取FrameBuffer的数据生成屏幕截图。那么MonkeyRunner还会用其他方式和目标设备进行通信吗?答案是肯定的,且看我们一步步分析道来。
1.概述
MonkeyRunner和目标设备打交道都是通过ChimpChat层进行封装分发但最终是在ddmlib进行处理的,其中囊括的方法大体如下:
- 发送monkey命令:MonkeyRunner先通过adb shell发送命令"monkey -port 12345"在目标机器上启动monkey以监听端口接受连接,然后MonkeyRunner通过连接该端口建立socket并发送monkey命令。所有与界面相关的操作都是通过这种方式发送到目标机器的。
- 发送adb协议请求:通过发送adb协议请求来与目标设备通信的,详情请查看<<谁动了我的截图?--Monkeyrunner takeSnapshot方法源码跟踪分析>>和<<adb概览及协议参考>>,其实adb命令行客户端的所有命令最终都是通过发送遵循adb协议的请求来实现的,只是做成命令行方式方便终端用户使用而已
- 发送adb shell命令:模拟adb命令行工具发送adb shell命令,只是不是真正的直接命令行调用adb工具,而是在每一个命令执行之前先通过上面的“发送adb协议请求“发送“shell:”请求建立一个和adb服务器通信的adb shell的socket连接通道,adb服务器再和目标设备的adb守护进程进行通信
以下是MonkeyDevice所有请求对应的与设备通信方式
请求 | 是否需要和目标设备通信 | 通信方式 | 注解 |
发送adb shell命令 | |||
getSystemProperty | 是 | 发送adb shell命令 | |
installPackage | 是 | 发送adb shell命令 | 传送数据时发送adb协议请求,发送安装命令时使用adb shell命令 |
startActivity | 是 | 发送adb shell命令 | |
broadcastIntent | 是 | 发送adb shell命令 | |
instrument | 是 | 发送adb shell命令 | |
shell | 是 | 发送adb shell命令 | 命令为空,所以相当于直接执行”adb shell “ |
removePackage | 是 | 发送adb shell命令 | |
发送monkey命令 | |||
getProperty | 是 | 发送monkey命令 | |
wake | 是 | 发送monkey命令 | |
dispose | 是 | 发送monkey命令 | |
press | 是 | 发送monkey命令 | |
type | 是 | 发送monkey命令 | |
touch | 是 | 发送monkey命令 | |
drag | 是 | 发送monkey命令 | |
getViewIdList | 是 | 发送monkey命令 | |
getView | 是 | 发送monkey命令 | |
getViews | 是 | 发送monkey命令 | |
getRootView | 是 | 发送monkey命令 | |
发送adb协议请求 | |||
takeSnapshot | 是 | 发送adb协议请求 | |
reboot | 是 | 发送adb协议命令 | |
installPackage | 是 | 发送adb协议请求 | 相当于直接发送adb命令行命令’adb push’ |
分析之前请大家准备好对应的几个库的源码:
2. 发送monkey命令
在剖析如何发送monkey命令之前,我们需要先去了解一个类,因为这个类是处理所有monkey命令的关键,这就是ChimpChat库的ChimpManager类。 我们先查看其构造函数,看它是怎么初始化的:
/* */ private Socket monkeySocket;/* */ /* */ private BufferedWriter monkeyWriter;/* */ /* */ private BufferedReader monkeyReader;/* */ /* */ /* */ public ChimpManager(Socket monkeySocket)/* */ throws IOException/* */ {/* 62 */ this.monkeySocket = monkeySocket;/* 63 */ this.monkeyWriter = new BufferedWriter(new OutputStreamWriter(monkeySocket.getOutputStream()));/* */ /* 65 */ this.monkeyReader = new BufferedReader(new InputStreamReader(monkeySocket.getInputStream()));/* */ }
初始化所做的事情如下
- 把构造函数传进来的monkeySocket这个socket对象保存起来,往下会分析这个socket是如何创立的
- 初始化monkeyWriter这个BufferedWriter,今后往monkey的socket发送命令的时候用的就是它
- 初始化monkeyReader这个BufferedReader,今后从monkey的socket读返回的时候用的就是它
好,那么现在我们返回来看这个类是什么时候实例化的。请定位到AdbChimpDevice的构造函数:
/* */ private ChimpManager manager;/* */ /* */ public AdbChimpDevice(IDevice device)/* */ {/* 70 */ this.device = device;/* 71 */ this.manager = createManager("127.0.0.1", 12345);/* */ /* 73 */ Preconditions.checkNotNull(this.manager);/* */ }
可以看到ChimpManager是在AdbChimpDevice构造的时候已经开始初始化的了,初始化传入的地址是"127.0.0.1"和端口是12345,这个是在下面分析的createManager这个方法中创建socket用的,也就是我们上面提到的monkeySocket.在继续之前这里我们先整理下思路,结合上一篇文章,我们看到几个重要的类的初始化流程是这样的:
- MonkeyRunner在启动的时候会先启动MonkeyRunnerStarter这个类,该类的构造函数调用ChimpChat的getInstance方法实例化ChimpChat.
- ChimpChat的getInstance方法会先实例化AdbBackend这个类,然后构建 ChimpChat自身这个实例
- 用户调用MonkeyRunner.waitForConnection()方法初始化MonkeyDevice
- 以上的waitForConnection()又调用的是ChimpChat的waitforConnection()方法
- ChimpChat的waitForConnection方法调用的是AdbBackend的waitForConnection方法最终会findAttachedDevice找到目标设备然后用该设备初始化AdbChimpDevice
根据以上的流程我们就很清晰AdbChimpDevice其实在测试脚本一调用MonkeyRunner.waitForConnection方法的时候就已经会初始化的了,也就是说ChimpManager也在这个时候已经初始化的了。 好,那么我们继续看AdbChimpDevice里面的方法createManager是如何对ChimpManager进行初始化的:
/* */ private ChimpManager createManager(String address, int port) {/* */ try {/* 125 */ this.device.createForward(port, port);/* */ } catch (TimeoutException e) {/* 127 */ LOG.log(Level.SEVERE, "Timeout creating adb port forwarding", e);/* 128 */ return null;/* */ } catch (AdbCommandRejectedException e) {/* 130 */ LOG.log(Level.SEVERE, "Adb rejected adb port forwarding command: " + e.getMessage(), e);/* 131 */ return null;/* */ } catch (IOException e) {/* 133 */ LOG.log(Level.SEVERE, "Unable to create adb port forwarding: " + e.getMessage(), e);/* 134 */ return null;/* */ }/* */ /* 137 */ String command = "monkey --port " + port;/* 138 */ executeAsyncCommand(command, new LoggingOutputReceiver(LOG, Level.FINE));/* */ /* */ try/* */ {/* 142 */ Thread.sleep(1000L);/* */ } catch (InterruptedException e) {/* 144 */ LOG.log(Level.SEVERE, "Unable to sleep", e);/* */ }/* */ InetAddress addr;/* */ try/* */ {/* 149 */ addr = InetAddress.getByName(address);/* */ } catch (UnknownHostException e) {/* 151 */ LOG.log(Level.SEVERE, "Unable to convert address into InetAddress: " + address, e);/* 152 */ return null;/* */ }/* */ /* */ /* */ /* */ /* */ /* 159 */ boolean success = false;/* 160 */ ChimpManager mm = null;/* 161 */ long start = System.currentTimeMillis();/* */ /* 163 */ while (!success) {/* 164 */ long now = System.currentTimeMillis();/* 165 */ long diff = now - start;/* 166 */ if (diff > 30000L) {/* 167 */ LOG.severe("Timeout while trying to create chimp mananger");/* 168 */ return null;/* */ }/* */ try/* */ {/* 172 */ Thread.sleep(1000L);/* */ } catch (InterruptedException e) {/* 174 */ LOG.log(Level.SEVERE, "Unable to sleep", e);/* */ }/* */ Socket monkeySocket;/* */ try/* */ {/* 179 */ monkeySocket = new Socket(addr, port);/* */ } catch (IOException e) {/* 181 */ LOG.log(Level.FINE, "Unable to connect socket", e);/* 182 */ success = false; }/* 183 */ continue;/* */ /* */ try/* */ {/* 187 */ mm = new ChimpManager(monkeySocket);/* */ } catch (IOException e) {/* 189 */ LOG.log(Level.SEVERE, "Unable to open writer and reader to socket"); }/* 190 */ continue;/* */ /* */ try/* */ {/* 194 */ mm.wake();/* */ } catch (IOException e) {/* 196 */ LOG.log(Level.FINE, "Unable to wake up device", e);/* 197 */ success = false; }/* 198 */ continue;/* */ /* 200 */ success = true;/* */ }/* */ /* 203 */ return mm;/* */ }
这个方法比较长,但大体做的事情如下:
- 通过调用ddmlib的device类里面的createForward方法来把主机pc端本地的端口转发给目标机器端的monkey监听端口,这样子做的好处是我们通过直接连接主机pc端的转发端口发送命令就会等同于通过网络连接上目标机器的monkey监听端口来发送monkey命令
- 调用executeAsyncCommand方法发送异步adb shell命令 “monkey -port"到目标机器开启monkey并监听以上描述的端口
- 创建连接到主机pc对应目标设备monkey监听端口的monkeySocket
- 把该monkeySocket传递到本章节开头说的ChimpManager构造函数对ChimpManager进行实例化
/* */ public void press(String keyName, TouchPressType type)/* */ {/* */ try/* */ {/* 326 */ switch (3.$SwitchMap$com$android$chimpchat$core$TouchPressType[type.ordinal()]) {/* */ case 1: /* 328 */ this.manager.press(keyName);/* 329 */ break;/* */ case 2: /* 331 */ this.manager.keyDown(keyName);/* 332 */ break;/* */ case 3: /* 334 */ this.manager.keyUp(keyName);/* */ }/* */ }/* */ catch (IOException e) {/* 338 */ LOG.log(Level.SEVERE, "Error sending press event: " + keyName + " " + type, e);/* */ }/* */ }方法很简单,就是根据不同的按下类型来调用ChimpManager中不同的press的方法,我们这里假设用户按下的是 DOWN_AND_UP这个类型,也就是说调用的是ChimpMananer里面的press方法:
/* */ public boolean press(String name)/* */ throws IOException/* */ {/* 135 */ return sendMonkeyEvent("press " + name);/* */ }跟着调用sendMonkeyEvent:
/* */ private boolean sendMonkeyEvent(String command)/* */ throws IOException/* */ {/* 234 */ synchronized (this) {/* 235 */ String monkeyResponse = sendMonkeyEventAndGetResponse(command);/* 236 */ return parseResponseForSuccess(monkeyResponse);/* */ }/* */ }跟着调用sendMonkeyEventAndGetResponse方法:
/* */ private String sendMonkeyEventAndGetResponse(String command)/* */ throws IOException/* */ {/* 182 */ command = command.trim();/* 183 */ LOG.info("Monkey Command: " + command + ".");/* */ /* */ /* 186 */ this.monkeyWriter.write(command + "\n");/* 187 */ this.monkeyWriter.flush();/* 188 */ return this.monkeyReader.readLine();/* */ }以上这几个方法都是在ChimpManager这个类里面的成员方法。从最后这个sendMonkeyEventAndGetResponse方法我们可以看到它所做的事情就是用我们前面描述的monkeyWritter和monkeyReader这两个成员变量往主机pc这边的终会转发给目标机器monkey那个端口(其实就是上面的monkeySocket)进行读写操作。
3. 发送adb协议请求
请查看《 谁动了我的截图?--Monkeyrunner takeSnapshot方法源码跟踪分析》4. 发送adb shell命令
通过上一篇文章《谁动了我的截图?--Monkeyrunner takeSnapshot方法源码跟踪分析》的分析,我们知道MonkeyRunner分发不同的设备控制信息是在ChimpChat库的AdbChimpDevice这个类里面进行的。所以这里我就不会从头开始分析我们是怎么进入到这个类里面的了,大家不清楚的请先查看上一篇投石问路的文章再返回来看本文。 这里我们尝试以getSystemProperty这个稍微复杂点的方法为例子分析下MonkeyRunner是真么通过adb shell发送命令的,我们首先定位到AdbChimpDevice的该方法:
/* */ public String getSystemProperty(String key)/* */ {/* 224 */ return this.device.getProperty(key);/* */ }
这里的device成员函数指的就是ddmlib库里面的Device这个类(请查看上一篇文章),那么我们进去该类看下getProperty这个方法:
/* */ public String getProperty(String name)/* */ {/* 379 */ return (String)this.mProperties.get(name);/* */ }
该方法直接使用mProperties这个Device类的成员变量的get方法根据property的名字获得返回值,从定义可以看出这是个map:
/* 65 */ private final Map<String, String> mProperties = new HashMap();
且这个map是在初始化Device实例之前就已经定义好的了,因为其构造函数并没有代码提及,但是我们可以看到Device类里面有一个函数专门往这个map里面添加property:
/* */ void addProperty(String label, String value) {/* 779 */ this.mProperties.put(label, value);/* */ }
那么这个addProperty又是在哪里被调用了呢?一番查看后发现是在ddmlib里面的GetPropertyReceiver这个类里面的processNewLines这个方法:
/* */ public void processNewLines(String[] lines)/* */ {/* 49 */ for (String line : lines) {/* 50 */ if ((!line.isEmpty()) && (!line.startsWith("#")))/* */ {/* */ /* */ /* 54 */ Matcher m = GETPROP_PATTERN.matcher(line);/* 55 */ if (m.matches()) {/* 56 */ String label = m.group(1);/* 57 */ String value = m.group(2);/* */ /* 59 */ if (!label.isEmpty()) {/* 60 */ this.mDevice.addProperty(label, value);/* */ }/* */ }/* */ }/* */ }/* */ }
给这个map增加所有property的地方是知道了,但是问题是什么时候增加呢?这里我们先卖个关子。 继续之前我们先要了解下ddmlib这个库里面的DeviceMonitor这个类,这个类会启动一个线程来监控所有连接到主机的设备的状态。
/* */ boolean start()/* */ {/* 715 */ if ((this.mAdbOsLocation != null) && (sAdbServerPort != 0) && ((!this.mVersionCheck) || (!startAdb()))) {/* 716 */ return false;/* */ }/* */ /* 719 */ this.mStarted = true;/* */ /* */ /* 722 */ this.mDeviceMonitor = new DeviceMonitor(this);/* 723 */ this.mDeviceMonitor.start();/* */ /* 725 */ return true;/* */ }
线程的启动是在我们之前见过的AdbDebugBridge里面,一旦adb启动,就会去调用构造函数去初始化DeviceMonitor实例,并调用实例的上面这个start方法来启动一个线程。
/* */ boolean start()/* */ {/* 715 */ if ((this.mAdbOsLocation != null) && (sAdbServerPort != 0) && ((!this.mVersionCheck) || (!startAdb()))) {/* 716 */ return false;/* */ }/* */ /* 719 */ this.mStarted = true;/* */ /* */ /* 722 */ this.mDeviceMonitor = new DeviceMonitor(this);/* 723 */ this.mDeviceMonitor.start();/* */ /* 725 */ return true;/* */ }
该线程会进行一个无限循环来检测设备的变动。
private void deviceMonitorLoop()/* */ {/* */ do/* */ {/* */ try/* */ {/* 161 */ if (this.mMainAdbConnection == null) {/* 162 */ Log.d("DeviceMonitor", "Opening adb connection");/* 163 */ this.mMainAdbConnection = openAdbConnection();/* 164 */ if (this.mMainAdbConnection == null) {/* 165 */ this.mConnectionAttempt += 1;/* 166 */ Log.e("DeviceMonitor", "Connection attempts: " + this.mConnectionAttempt);/* 167 */ if (this.mConnectionAttempt > 10) {/* 168 */ if (!this.mServer.startAdb()) {/* 169 */ this.mRestartAttemptCount += 1;/* 170 */ Log.e("DeviceMonitor", "adb restart attempts: " + this.mRestartAttemptCount);/* */ }/* */ else {/* 173 */ this.mRestartAttemptCount = 0;/* */ }/* */ }/* 176 */ waitABit();/* */ } else {/* 178 */ Log.d("DeviceMonitor", "Connected to adb for device monitoring");/* 179 */ this.mConnectionAttempt = 0;/* */ }/* */ }/* */ /* 183 */ if ((this.mMainAdbConnection != null) && (!this.mMonitoring)) {/* 184 */ this.mMonitoring = sendDeviceListMonitoringRequest();/* */ }/* */ /* 187 */ if (this.mMonitoring)/* */ {/* 189 */ int length = readLength(this.mMainAdbConnection, this.mLengthBuffer);/* */ /* 191 */ if (length >= 0)/* */ {/* 193 */ processIncomingDeviceData(length);/* */ /* */ /* 196 */ this.mInitialDeviceListDone = true;/* */ }/* */ }/* */ }/* */ catch (AsynchronousCloseException ace) {}catch (TimeoutException ioe)/* */ {/* 202 */ handleExpectionInMonitorLoop(ioe);/* */ } catch (IOException ioe) {/* 204 */ handleExpectionInMonitorLoop(ioe);/* */ }/* 206 */ } while (!this.mQuit);/* */ }
一旦发现设备有变动,该循环会立刻调用processIncomingDeviceData这个方法来更新设备信息
/* */ private void processIncomingDeviceData(int length) throws IOException/* */ {/* 298 */ ArrayList<Device> list = new ArrayList();/* */ /* 300 */ if (length > 0) {/* 301 */ byte[] buffer = new byte[length];/* 302 */ String result = read(this.mMainAdbConnection, buffer);/* */ /* 304 */ String[] devices = result.split("\n");/* */ /* 306 */ for (String d : devices) {/* 307 */ String[] param = d.split("\t");/* 308 */ if (param.length == 2)/* */ {/* 310 */ Device device = new Device(this, param[0], IDevice.DeviceState.getState(param[1]));/* */ /* */ /* */ /* 314 */ list.add(device);/* */ }/* */ }/* */ }/* */ /* */ /* 320 */ updateDevices(list);/* */ }
该方法首先会取得所有的device列表(类似"adb devices -l"命令获得所有device列表),然后调用updateDevices这个方法来对所有设备信息进行一次更新:
private void updateDevices(ArrayList<Device> newList)/* */ {/* 329 */ synchronized ()/* */ {/* */ /* */ /* 333 */ ArrayList<Device> devicesToQuery = new ArrayList();/* 334 */ synchronized (this.mDevices)/* */ {/* */ /* */ /* */ /* */ /* */ /* */ /* */ /* */ /* 344 */ for (int d = 0; d < this.mDevices.size();) {/* 345 */ Device device = (Device)this.mDevices.get(d);/* */ /* */ /* 348 */ int count = newList.size();/* 349 */ boolean foundMatch = false;/* 350 */ for (int dd = 0; dd < count; dd++) {/* 351 */ Device newDevice = (Device)newList.get(dd);/* */ /* 353 */ if (newDevice.getSerialNumber().equals(device.getSerialNumber())) {/* 354 */ foundMatch = true;/* */ /* */ /* 357 */ if (device.getState() != newDevice.getState()) {/* 358 */ device.setState(newDevice.getState());/* 359 */ device.update(1);/* */ /* */ /* */ /* 363 */ if (device.isOnline()) {/* 364 */ if ((AndroidDebugBridge.getClientSupport()) && /* 365 */ (!startMonitoringDevice(device))) {/* 366 */ Log.e("DeviceMonitor", "Failed to start monitoring " + device.getSerialNumber());/* */ }/* */ /* */ /* */ /* */ /* 372 */ if (device.getPropertyCount() == 0) {/* 373 */ devicesToQuery.add(device);/* */ }/* */ }/* */ }/* */ /* */ /* 379 */ newList.remove(dd);/* 380 */ break;/* */ }/* */ }/* */ /* 384 */ if (!foundMatch)/* */ {/* */ /* 387 */ removeDevice(device);/* 388 */ this.mServer.deviceDisconnected(device);/* */ }/* */ else {/* 391 */ d++;/* */ }/* */ }/* */ /* */ /* */ /* 397 */ for (Device newDevice : newList)/* */ {/* 399 */ this.mDevices.add(newDevice);/* 400 */ this.mServer.deviceConnected(newDevice);/* */ /* */ /* 403 */ if ((AndroidDebugBridge.getClientSupport()) && /* 404 */ (newDevice.isOnline())) {/* 405 */ startMonitoringDevice(newDevice);/* */ }/* */ /* */ /* */ /* 410 */ if (newDevice.isOnline()) {/* 411 */ devicesToQuery.add(newDevice);/* */ }/* */ }/* */ }/* */ /* */ /* 417 */ for (Device d : devicesToQuery) {/* 418 */ queryNewDeviceForInfo(d);/* */ }/* */ }/* 421 */ newList.clear();/* */ }
该方法我们关注的是最后面它会循环每个设备,然后调用queryNewDeviceForInfo这个方法去更新每个设备所有的porperty信息。
/* */ private void queryNewDeviceForInfo(Device device)/* */ {/* */ try/* */ {/* 446 */ device.executeShellCommand("getprop", new GetPropReceiver(device));/* */ /* */ /* 449 */ queryNewDeviceForMountingPoint(device, "EXTERNAL_STORAGE");/* 450 */ queryNewDeviceForMountingPoint(device, "ANDROID_DATA");/* 451 */ queryNewDeviceForMountingPoint(device, "ANDROID_ROOT");/* */ /* */ /* 454 */ if (device.isEmulator()) {/* 455 */ EmulatorConsole console = EmulatorConsole.getConsole(device);/* 456 */ if (console != null) {/* 457 */ device.setAvdName(console.getAvdName());/* 458 */ console.close();/* */ }/* */ }/* */ } catch (TimeoutException e) {/* 462 */ Log.w("DeviceMonitor", String.format("Connection timeout getting info for device %s", new Object[] { device.getSerialNumber() }));/* */ /* */ }/* */ catch (AdbCommandRejectedException e)/* */ {/* 467 */ Log.w("DeviceMonitor", String.format("Adb rejected command to get device %1$s info: %2$s", new Object[] { device.getSerialNumber(), e.getMessage() }));/* */ /* */ }/* */ catch (ShellCommandUnresponsiveException e)/* */ {/* 472 */ Log.w("DeviceMonitor", String.format("Adb shell command took too long returning info for device %s", new Object[] { device.getSerialNumber() }));/* */ /* */ }/* */ catch (IOException e)/* */ {/* 477 */ Log.w("DeviceMonitor", String.format("IO Error getting info for device %s", new Object[] { device.getSerialNumber() }));/* */ }/* */ }
到了这里我们终于看到了该方法调用了一个ddmlib库的device类里面的executeShellCommand方法来执行‘getprop'这个命令。到目前位置我们达到的目的是知道了getSystemProperty这个MonkeyDevice的api最终确实是通过发送'adb shell getporp‘命令来获得设备属性的。 但这里遗留了两个问题
- 一个是之前提到的GetPropertyReceiver这个类里面的增加property的processNewLines方法是在哪里调用的
- 一个是executeShellCommand究竟是怎么工作的
各位看官不用着急,且看我们往下分析,很快就会水落石出了。我们继续跟踪executeShellCommand这个方法,在我们的例子中其以命令'getprop'和new的GetPropertyReceiver对象实例为参数,最终会调用到Device这个类里面的executeShellCommand这个方法。注意这个GetPropertyReceiver很重要,我们往后会看到。
/* */ public void executeShellCommand(String command, IShellOutputReceiver receiver, int maxTimeToOutputResponse)/* */ throws TimeoutException, AdbCommandRejectedException, ShellCommandUnresponsiveException, IOException/* */ {/* 618 */ AdbHelper.executeRemoteCommand(AndroidDebugBridge.getSocketAddress(), command, this, receiver, maxTimeToOutputResponse);/* */ }
方法中继续把调用直接抛给AdbHelper这个工具类,
/* */ static void executeRemoteCommand(InetSocketAddress adbSockAddr, String command, IDevice device, IShellOutputReceiver rcvr, long maxTimeToOutputResponse, TimeUnit maxTimeUnits)/* */ throws TimeoutException, AdbCommandRejectedException, ShellCommandUnresponsiveException, IOException/* */ {/* 378 */ long maxTimeToOutputMs = 0L;/* 379 */ if (maxTimeToOutputResponse > 0L) {/* 380 */ if (maxTimeUnits == null) {/* 381 */ throw new NullPointerException("Time unit must not be null for non-zero max.");/* */ }/* 383 */ maxTimeToOutputMs = maxTimeUnits.toMillis(maxTimeToOutputResponse);/* */ }/* */ /* 386 */ Log.v("ddms", "execute: running " + command);/* */ /* 388 */ SocketChannel adbChan = null;/* */ try {/* 390 */ adbChan = SocketChannel.open(adbSockAddr);/* 391 */ adbChan.configureBlocking(false);/* */ /* */ /* */ /* */ /* 396 */ setDevice(adbChan, device);/* */ /* 398 */ byte[] request = formAdbRequest("shell:" + command);/* 399 */ write(adbChan, request);/* */ /* 401 */ AdbResponse resp = readAdbResponse(adbChan, false);/* 402 */ if (!resp.okay) {/* 403 */ Log.e("ddms", "ADB rejected shell command (" + command + "): " + resp.message);/* 404 */ throw new AdbCommandRejectedException(resp.message);/* */ }/* */ /* 407 */ byte[] data = new byte['䀀'];/* 408 */ ByteBuffer buf = ByteBuffer.wrap(data);/* 409 */ long timeToResponseCount = 0L;/* */ /* */ for (;;)/* */ {/* 413 */ if ((rcvr != null) && (rcvr.isCancelled())) {/* 414 */ Log.v("ddms", "execute: cancelled");/* 415 */ break;/* */ }/* */ /* 418 */ int count = adbChan.read(buf);/* 419 */ if (count < 0)/* */ {/* 421 */ rcvr.flush();/* 422 */ Log.v("ddms", "execute '" + command + "' on '" + device + "' : EOF hit. Read: " + count);/* */ /* 424 */ break; }/* 425 */ if (count == 0) {/* */ try {/* 427 */ int wait = 25;/* 428 */ timeToResponseCount += wait;/* 429 */ if ((maxTimeToOutputMs > 0L) && (timeToResponseCount > maxTimeToOutputMs)) {/* 430 */ throw new ShellCommandUnresponsiveException();/* */ }/* 432 */ Thread.sleep(wait);/* */ }/* */ catch (InterruptedException ie) {}/* */ }/* */ else {/* 437 */ timeToResponseCount = 0L;/* */ /* */ /* 440 */ if (rcvr != null) {/* 441 */ rcvr.addOutput(buf.array(), buf.arrayOffset(), buf.position());/* */ }/* 443 */ buf.rewind();/* */ }/* */ }/* */ } finally {/* 447 */ if (adbChan != null) {/* 448 */ adbChan.close();/* */ }/* 450 */ Log.v("ddms", "execute: returning");/* */ }/* */ }
方法中先创建一个面向adb服务器的socket通道,然后通过发送adb协议请求的'shell:'命令获得一个adb shell然后再把相应的adb shell命令发送到该socket。从这里可以看到,“发送adb shell命令“其实是基于”发送adb协议请求“的,因为在发送命令之前需要先通过组织基于adb协议的请求”shell:“来获得adb shell。对比上一篇文章《谁动了我的截图?--Monkeyrunner takeSnapshot方法源码跟踪分析》我们可以看到“发送adb协议请求”跟“发送adb shell命名”的最大区别就是:
- 发送adb协议请求:不需要初始化adb shell,直接通过构造基于adb协议的请求把命令发送出去给adb服务器。
- 发送adb shell命令:每个命令都需要先发送“adb协议请求”的“shell:”来先建立一个adb shell,然后才能够发送命令到adb服务器,再由adb服务器转发到设备端的adb守护进程或者服务。
/* */ public final void addOutput(byte[] data, int offset, int length)/* */ {/* 53 */ if (!isCancelled()) {/* 54 */ String s = new String(data, offset, length, Charsets.UTF_8);/* */ /* */ /* */ /* 58 */ if (this.mUnfinishedLine != null) {/* 59 */ s = this.mUnfinishedLine + s;/* 60 */ this.mUnfinishedLine = null;/* */ }/* */ /* */ /* 64 */ this.mArray.clear();/* 65 */ int start = 0;/* */ for (;;) {/* 67 */ int index = s.indexOf("\r\n", start);/* */ /* */ /* */ /* 71 */ if (index == -1) {/* 72 */ this.mUnfinishedLine = s.substring(start);/* 73 */ break;/* */ }/* */ /* */ /* */ /* 78 */ String line = s.substring(start, index);/* 79 */ if (this.mTrimLines) {/* 80 */ line = line.trim();/* */ }/* 82 */ this.mArray.add(line);/* */ /* */ /* 85 */ start = index + 2;/* */ }/* */ /* 88 */ if (!this.mArray.isEmpty())/* */ {/* */ /* 91 */ String[] lines = (String[])this.mArray.toArray(new String[this.mArray.size()]);/* */ /* */ /* 94 */ processNewLines(lines);/* */ }/* */ }/* */ }这个函数所作的事情就是把'adb shell getprop‘返回的所有信息一行一行的进行处理,注意最终处理的函数就是processNewLines。还记得这个函数吧?这个就是我们上面提到的GetPropertyReceiver这个类中用来往mProperties这个map增加property的了。迄今为止我们算是把以上留下了两个疑问给解决完了
作者 | 自主博客 | 微信服务号及扫描码 | CSDN |
天地会珠海分舵 | http://techgogogo.com | 服务号:TechGoGoGo扫描码: | http://blog.csdn.net/zhubaitian |
更多相关文章
- Android(安卓)Bluetooth HID实现详解
- Android面试笔试集锦
- Android(安卓)Activity 各函数解析
- Android中解析读取复杂word,excel,ppt等的方法
- android平台上的sqllite_简介
- Android中MVVM是什么?
- android在代码中为new出的控件设置ID及setId()异常
- android activity与fragment的生命周期详细研究
- android-studio adb命令大全