官网地址：http://developer.android.com/guide/developing/device.html#setting-up

Using Hardware Devices

In this document

Setting up a Device for Development
1. USB Vendor IDs

You can use any Android-powered device as an environment for running, debugging, and testing your applications. The tools included in the SDK make it easy to install and run your application on the device each time you compile. You can install your application on the device directly from Eclipse or from the command line with ADB. If you don't yet have a device, check with the service providers in your area to determine which Android-powered devices are available.

If you want a SIM-unlocked phone, then you might consider either an Android Dev Phone or the Google Nexus S. These are SIM-unlocked so that you can use them on any GSM network using a SIM card. The Android Dev Phones also feature an unlocked bootloader so you can install custom system images (great for developing and installing custom versions of the Android platform). To find a a place you can purchase the Nexus S, visitgoogle.com/phone. To purchase an Android Dev Phone, see theAndroid Marketsite (requires a developer account).

Note:When developing on a device, keep in mind that you should still use theAndroid emulatorto test your application on configurations that are not equivalent to those of your real device. Although the emulator does not allow you to test every device feature (such as the accelerometer), it does allow you to verify that your application functions properly on different versions of the Android platform, in different screen sizes and orientations, and more.

Setting up a Device for Development

With an Android-powered device, you can develop and debug your Android applications just as you would on the emulator. Before you can start, there are just a few things to do:

Declare your application as "debuggable" in your Android Manifest.
In Eclipse, you can do this from theApplicationtab when viewing the Manifest (on the right side, setDebuggabletotrue). Otherwise, in theAndroidManifest.xmlfile, addandroid:debuggable="true"to the<application>element.
Set up your device to allow installation of non-Market applications.
On the device, go toSettings > Applicationsand enableUnknown sources.
Turn on "USB Debugging" on your device.
On the device, go toSettings > Applications > Developmentand enableUSB debugging.
Set up your system to detect your device.
- If you're developing on Windows, you need to install a USB driver for adb. If you're using an Android Developer Phone (ADP), Nexus One, or Nexus S, see theGoogle Windows USB Driver. Otherwise, you can find a link to the appropriate OEM driver in theOEM USB Driversdocument.
- If you're developing on Mac OS X, it just works. Skip this step.
- If you're developing on Ubuntu Linux, you need to add audevrules file that contains a USB configuration for each type of device you want to use for development. In the rules file, each device manufacturer is identified by a unique vendor ID, as specified by theATTR{idVendor}property. For a list of vendor IDs, seeUSB Vendor IDs, below. To set up device detection on Ubuntu Linux:
  1. Log in as root and create this file:/etc/udev/rules.d/51-android.rules.
    Use this format to add each vendor to the file:
    SUBSYSTEM=="usb", ATTR{idVendor}=="0bb4", MODE="0666", GROUP="plugdev"
    
    In this example, the vendor ID is for HTC. TheMODEassignment specifies read/write permissions, andGROUPdefines which Unix group owns the device node.
    
    Note:The rule syntax may vary slightly depending on your environment. Consult theudevdocumentation for your system as needed. For an overview of rule syntax, see this guide towriting udev rules.
  2. Now execute:
    chmod a+r /etc/udev/rules.d/51-android.rules

You can verify that your device is connected by executingadb devicesfrom your SDKplatform-tools/directory. If connected, you'll see the device name listed as a "device."

If using Eclipse, run or debug your application as usual. You will be presented with aDevice Chooserdialog that lists the available emulator(s) and connected device(s). Select the device upon which you want to install and run the application.

If using theAndroid Debug Bridge(adb), you can issue commands with the-dflag to target your connected device.

USB Vendor IDs

This table provides a reference to the vendor IDs needed in order to add USB device support on Linux. The USB Vendor ID is the value given to theATTR{idVendor}property in the rules file, as described above.

Company	USB Vendor ID
Acer	`0502`
ASUS	`0b05`
Dell	`413c`
Foxconn	`0489`
Garmin-Asus	`091E`
Google	`18d1`
HTC	`0bb4`
Huawei	`12d1`
K-Touch	`24e3`
KT Tech	`2116`
Kyocera	`0482`
Lenevo	`17EF`
LG	`1004`
Motorola	`22b8`
NEC	`0409`
Nook	`2080`
Nvidia	`0955`
OTGV	`2257`
Pantech	`10A9`
Philips	`0471`
PMC-Sierra	`04da`
Qualcomm	`05c6`
SK Telesys	`1f53`
Samsung	`04e8`
Sharp	`04dd`
Sony Ericsson	`0fce`
Toshiba	`0930`
ZTE	`19D2`

Ubuntu下android真机调试Using Hardware Devices

Using Hardware Devices

In this document

See also

Setting up a Device for Development

USB Vendor IDs

更多相关文章

随机推荐