Android的消息机制
Android的消息机制
本文所要讲述的内容是Android的消息机制。提到消息机制读者应该并不陌生,在日常开发中不可避免的要涉及这方面的内容。从开发者的角度来说, Handler是Android消息机制的上层接口, 这使得在开发过程中只需要和Handler交互即可。Handler的使用过程很简单,通过它可以轻松地将一个任务切换到Handler所在的线程中去执行。很多人认为Handler的作用是更新UI,这的确没错,但是更新UI仅仅是Handler的一个特殊使用场景。具体来说是这样的:有时候需要在子线程中进行耗时的I/O操作,可能是读取文件或者访问网络等,当耗时操作完成时可能需要在UI上做一些改变,由于Android开发规范的限制,我们并不能在子线程中访问UI控件,否则就会触发程序异常,这个时候通过Handler就可以将更新UI的操作切换到主线程中执行。因此,本质上来说,Handler并不是专门用于更新UI的,它只是常被开发者用来更新UI。
Android的消息机制主要是指Handler的运行机制,Handler的运行需要底层的MessageQueue和Looper的支撑。MessageQueue的中文翻译是消息队列,顾名思义,它内部存储了一组消息,以队列的形式对外提供插入和删除的工作。虽然叫消息队列,但是它的内部结构并不是真正的队列,而是采用单链表的数据结构来存储消息列表。Looper的中文翻译为循环,这里可以理解为消息循环。由于MessageQueue只是一个消息存储单元,它不能去处理消息,而Looper就填补了这个功能,Looper会以无限循环的方式去查找是否有新消息, 如果有的话就处理消息,否则就一直等待着。Looper中还有一个特殊的概念,那就是ThreadLocal,ThreadLocal并不是线程,它的作用是可以在每个线程中存储数据。我们知道,Handler创建的时候会采用当前线程的Looper来构造消息循环系统,那么Handler内部如何获取到当前线程的Looper呢?这就要使用ThreadLocal了,ThreadLocal可以在不同的线程中互不干扰地存储并提供数据,通过ThreadLocal可以轻松的获取每个线程的Looper。当然需要注意的是, 线程是默认没有Looper的,如果需要使用Handler就必须为线程创建Looper。我们经常提到的主线程,也叫UI线程,它就是ActivityThread,ActivityThread被创建时就会初始化Looper,这也是在主线程中默认可以使用Handler的原因。
一、Android的消息机制概述
前面提到,Android的消息机制主要是指Handler的运行机制以及Handler所附带的MessageQueue和Looper的工作过程,这三者实际上是一个整体,只不过我们开发过程中比较多地接触Handler而已。Handler的主要作用是将一个任务切换到某个指定线程中去执行,那么Android为什么要提供这个功能呢?或者说Android为什么需要提供在某个具体线程中执行任务这种功能呢? 这是因为Android规定访问UI只能在主线程中进行,如果在子线程中访问UI,那么程序就会抛出异常,ViewRootImpl对UI操作做了验证,这个验证工作是由ViewRootImpl的checkThread方法来完成的,如下所示。
void checkThread() { if (mThread != Thread.currentThread()) { throw new CalledFromWrongThreadException( "Only the original thread that created a view hierarchy can touch its views."); }}
针对checkThread方法中抛出的异常,相信读者在开发中都曾经遇到过。由于这一点的限制,导致必须在主线程中访问UI,但是Android又建议不要在主线程中进行耗时操作,否则会导致程序无法响应即ANR。考虑一种情况,假如我们需要从服务端拉取一些信息并将其显示在UI上,这个时候必须在子线程中进行拉取,拉取完毕后又不能在子线程中直接访问UI,如果没有Handler, 那么我们的确没有办法将访问UI的工作切换到主线程去执行。因此,系统之所以提供Handler,主要原因就是为了解决在子线程中无法访问UI的矛盾。
这里再延伸一点,系统为什么不允许在子线程中访问UI呢?这是因为Android的UI控件不是线程安全的,如果在多线程中并发访问可能会导致UI控件处于不可预期的状态,那为什么系统不对UI控件的访问加上锁机制呢?缺点有两个:首先加上锁会让UI访问的逻辑变得复杂;其次锁机制会降低UI访问的效率,因为锁机制会阻塞某些线程的执行。鉴于这两个缺点,最简单且高效的方法就是采用单线程模型来处理UI操作,对于开发者来说也不是很麻烦,只是需要通过Handler切换一下UI访问的执行线程即可。
Handler的使用方法这里就不做介绍了, 这里描述一下Handler的工作原理。Handler创建时会采用当前线程的Looper来构建内部的消息循环系统,如果当前线程没有Looper,那么就会报错。
if (mLooper == null) { throw new RuntimeException( "Can't create handler inside thread that has not called Looper.prepare()");}
如何解决上述问题呢?其实很简单只要为当前线程创建Looper即可,或者在一个有Looper的线程中创建Handler也行。
new Thread("thread1"){ @Override public void run() { Looper.prepare(); // 创建一个Looper Handler handler = new Handler(); Looper.loop(); // 开启消息循环 }}.start();
Handler创建完毕后,这个时候其内部的Looper以及MessageQueue就可以和Handler一起协同工作了, 然后通过Handler的post方法将一个Runnable投递到Handler内部的Looper中去处理,也可以通过Handler的send方法发送一个消息,这个消息同样会在Looper中处理。其实post方法最终也是通过send方法来完成的,接下来看下send方法的过程。当Handler的send方法被调用时,它会调用MessageQueue的enqueueMessage方法将这个消息放入消息队列中,然后Looper发现又新消息到来时,就会处理这个消息,最终消息中的Runnable或者Handler的handleMessage方法就会被调用。注意Looper是运行在创建Handler所在的线程中的,这样一来Handler中的业务逻辑就被切换到创建Handler所在的线程中去执行了。
二、Android的消息机制分析
由于Android的消息机制实际上就是Handler的运行机制,因此我们主要围绕着Handler的工作过程来分析Android的消息机制,主要包括Handler、MessageQueue和Looper。同时为了更好的理解Looper的工作原理,我们先来熟悉下ThreadLocal。
1. ThreadLocal的工作原理
ThreadLocal是一个线程内部的数据存储类, 通过它可以在指定的线程中存储数据,数据存储以后,只有在指定的线程中可以获取到存储的数据,对于其他线程来说则无法获取到数据。在日常开发中用到ThreadLocal的地方较少,但是某些特殊的场景下,通过ThreadLocal可以轻松地实现一些看起来很复杂的功能,这一点在Android的源码中也有所体现,比如Looper、ActivityThread以及AMS中都用到了ThreadLocal,具体到ThreadLocal的使用场景,这个不好统一来描述,一般来说,当某些数据是以线程为作用域并且不同线程具有不同数据副本的时候,就可以考虑采用ThreadLocal。比如对于Handler来说,它需要获取当前线程的Looper,很显然Looper的作用域就是线程并且不同线程具有不同的Looper,这个时候通过ThreadLocal就可以轻松实现Looper在线程中的存取。如果不采用ThreadLocal,那么系统就必须提供一个全局的哈希表供Handler查找指定线程的Looper,这样一来就必须提供一个类似于LooperManager的类了,但是系统并没有这么做而是选择了ThreadLocal,这就是ThreadLocal的好处。
说了这么多,可能还是有点抽象,下面通过实际的例子来演示ThreadLocal的真正含义。首先定义一个ThreadLocal对象,这里选择Boolean类型,如下所示。
private ThreadLocal mThreadLocal = new ThreadLocal<>(); mThreadLocal.set(true); System.out.println("[Thread#main] mThreadLocal="+mThreadLocal.get()); new Thread("Thread#1"){ @Override public void run() { mThreadLocal.set(false); System.out.println("[Thread#1] mThreadLocal="+mThreadLocal.get()); } }.start(); new Thread("Thread#2"){ @Override public void run() { System.out.println("[Thread#2] mThreadLocal="+mThreadLocal.get()); } }.start();
再看运行结果
[Thread#main] mThreadLocal=true[Thread#1] mThreadLocal=false[Thread#2] mThreadLocal=null
从上面日志可以看出,虽然在不同线程中访问的是同一个ThreadLocal对象,但是它们通过ThreadLocal获取到的值却是不一样的,这就是ThreadLocal的奇妙之处。结合这个例子然后再看一遍前面对ThreadLocal的使用场景的理论分析,我们应该就能比较好地理解ThreadLocal的使用方法了。ThreadLocal之所以有这么奇妙的效果,是因为不同线程访问同一个ThreadLocal的get方法,ThreadLocal内部会从各自的线程中取出一个数组,然后再从数组中根据当前ThreadLocal的索引去查找对应的Value的值。很显然,不同线程中数组是不同的,这就是为什么通过ThreadLocal可以在不同的线程中维护一套数据的副本并且彼此互不干扰。
对ThreadLocal的使用方法和工作过程做了介绍后,下面分析ThreadLocal的内部实现,ThreadLocal是一个泛型类,我们只需要弄清楚ThreadLocal的get和set方法就可以明白它的工作原理。
public void set(T value) { Thread t = Thread.currentThread(); ThreadLocalMap map = getMap(t); // t.threadLocals; if (map != null) map.set(this, value); else createMap(t, value); // t.threadLocals = new ThreadLocalMap(this, firstValue);}
在上面set方法中,首先会获取当前线程中的ThreadLocal数据,在Thread类的内部有个一成员专门用于存储线程的ThreadLocal的数据。
/* ThreadLocal values pertaining to this thread. This map is maintained * by the ThreadLocal class. */ ThreadLocal.ThreadLocalMap threadLocals = null;
因此获取当前线程的ThreadLocal数据就变得异常简单了。如果threadLocals的值为null,那么久对它进行初始化再进行存储的。在threadLocals内部有一个数组,private Entry[] table; ThreadLocal的值就存在这个table数组中。下面接着看下threadLocals.set方法。
static class Entry extends WeakReference { /** The value associated with this ThreadLocal. */ Object value; Entry(ThreadLocal k, Object v) { super(k); value = v; }}
private void set(ThreadLocal key, Object value) { // We don't use a fast path as with get() because it is at // least as common to use set() to create new entries as // it is to replace existing ones, in which case, a fast // path would fail more often than not. Entry[] tab = table; int len = tab.length; int i = key.threadLocalHashCode & (len-1); for (Entry e = tab[i]; e != null; e = tab[i = nextIndex(i, len)]) { ThreadLocal k = e.get(); if (k == key) { e.value = value; return; } if (k == null) { replaceStaleEntry(key, value, i); return; } } tab[i] = new Entry(key, value); int sz = ++size; if (!cleanSomeSlots(i, sz) && sz >= threshold) rehash();}
上面的代码实现了数据的存储过程,这里不去分析它的算法,最终ThreadLocal的值会被存在table数组中。
再看它的get方法。
public T get() { Thread t = Thread.currentThread(); ThreadLocalMap map = getMap(t); if (map != null) { ThreadLocalMap.Entry e = map.getEntry(this); if (e != null) return (T)e.value; } return setInitialValue();}private T setInitialValue() { T value = initialValue(); Thread t = Thread.currentThread(); ThreadLocalMap map = getMap(t); if (map != null) map.set(this, value); else createMap(t, value); return value;}protected T initialValue() { return null;}
可以发现,ThreadLocal的get方法的逻辑也比较清晰,它同样是取出当前线程的threadLocals对象,如果这个对象为null那么久返回初始值,并初始化threadLoacls对象。
从ThreadLocal的set和get方法可以看出,它们所操作的对象都是当前线程的threadLocals对象的table数组,因此在不同线程中访问同一个ThreadLocal的set和get方法,它们对ThreadLocal所做的读、写操作仅限于各自线程的内部,这就是为什么ThreadLocal可以在多个线程中互不干扰地存储和修改数据。
2. 消息队列的工作原理
消息队列在Android中指的是MessageQueue, MessageQueue主要包含两个操作,插入和读取。读取操作本身会伴随着删除操作,插入和读取对于的方法分别为enqueueMessage和next,其中enqueueMessage的作用是往消息队列中插入一条消息,而next的作用是从消息队里中取出一条消息并将其从消息队列中移除。尽管MessageQueue叫消息队列,但是它的内部实现并不是用队列,实际上它是通过一个单链表的数据结构来维护消息列表,单链表在插入和删除上比较有优势。下面从源码角度来看看它的实现。
boolean enqueueMessage(Message msg, long when) { if (msg.target == null) { throw new IllegalArgumentException("Message must have a target."); } if (msg.isInUse()) { throw new IllegalStateException(msg + " This message is already in use."); } synchronized (this) { if (mQuitting) { IllegalStateException e = new IllegalStateException( msg.target + " sending message to a Handler on a dead thread"); Log.w(TAG, e.getMessage(), e); msg.recycle(); return false; } msg.markInUse(); msg.when = when; Message p = mMessages; boolean needWake; if (p == null || when == 0 || when < p.when) { // New head, wake up the event queue if blocked. msg.next = p; mMessages = msg; needWake = mBlocked; } else { // Inserted within the middle of the queue. Usually we don't have to wake // up the event queue unless there is a barrier at the head of the queue // and the message is the earliest asynchronous message in the queue. needWake = mBlocked && p.target == null && msg.isAsynchronous(); Message prev; for (;;) { prev = p; p = p.next; if (p == null || when < p.when) { break; } if (needWake && p.isAsynchronous()) { needWake = false; } } msg.next = p; // invariant: p == prev.next prev.next = msg; } // We can assume mPtr != 0 because mQuitting is false. if (needWake) { nativeWake(mPtr); } } return true;}
从enqueueMessage的实现来看,它的主要操作其实就是单链表的插入操作,这里就不再过多解释了,下面再看next方法的实现。
Message next() { // Return here if the message loop has already quit and been disposed. // This can happen if the application tries to restart a looper after quit // which is not supported. final long ptr = mPtr; if (ptr == 0) { return null; } int pendingIdleHandlerCount = -1; // -1 only during first iteration int nextPollTimeoutMillis = 0; for (;;) { if (nextPollTimeoutMillis != 0) { Binder.flushPendingCommands(); } nativePollOnce(ptr, nextPollTimeoutMillis); synchronized (this) { // Try to retrieve the next message. Return if found. final long now = SystemClock.uptimeMillis(); Message prevMsg = null; Message msg = mMessages; if (msg != null && msg.target == null) { // Stalled by a barrier. Find the next asynchronous message in the queue. do { prevMsg = msg; msg = msg.next; } while (msg != null && !msg.isAsynchronous()); } if (msg != null) { if (now < msg.when) { // Next message is not ready. Set a timeout to wake up when it is ready. nextPollTimeoutMillis = (int) Math.min(msg.when - now, Integer.MAX_VALUE); } else { // Got a message. mBlocked = false; if (prevMsg != null) { prevMsg.next = msg.next; } else { mMessages = msg.next; } msg.next = null; if (DEBUG) Log.v(TAG, "Returning message: " + msg); msg.markInUse(); return msg; } } else { // No more messages. nextPollTimeoutMillis = -1; } // Process the quit message now that all pending messages have been handled. if (mQuitting) { dispose(); return null; } // If first time idle, then get the number of idlers to run. // Idle handles only run if the queue is empty or if the first message // in the queue (possibly a barrier) is due to be handled in the future. if (pendingIdleHandlerCount < 0 && (mMessages == null || now < mMessages.when)) { pendingIdleHandlerCount = mIdleHandlers.size(); } if (pendingIdleHandlerCount <= 0) { // No idle handlers to run. Loop and wait some more. mBlocked = true; continue; } if (mPendingIdleHandlers == null) { mPendingIdleHandlers = new IdleHandler[Math.max(pendingIdleHandlerCount, 4)]; } mPendingIdleHandlers = mIdleHandlers.toArray(mPendingIdleHandlers); } // Run the idle handlers. // We only ever reach this code block during the first iteration. for (int i = 0; i < pendingIdleHandlerCount; i++) { final IdleHandler idler = mPendingIdleHandlers[i]; mPendingIdleHandlers[i] = null; // release the reference to the handler boolean keep = false; try { keep = idler.queueIdle(); } catch (Throwable t) { Log.wtf(TAG, "IdleHandler threw exception", t); } if (!keep) { synchronized (this) { mIdleHandlers.remove(idler); } } } // Reset the idle handler count to 0 so we do not run them again. pendingIdleHandlerCount = 0; // While calling an idle handler, a new message could have been delivered // so go back and look again for a pending message without waiting. nextPollTimeoutMillis = 0; }}
可以发现next方法是一个无限循环的方法,如果消息队列中没有消息,那么next方法会一直阻塞在这里。当有新消息到来时,next方法会返回这条消息并将其从单链表中移除。
3. Looper的工作原理
Looper在Android的消息机制中扮演着消息循环的角色,具体来说就是它会不停地从MessageQueue中查看是否有新消息,如果有新消息就会立刻处理,否则就一直阻塞在那里。首先看下它的构造方法,在构造方法中它会创建一个MessageQueue,然后将当前线程的对象保存起来。
private Looper(boolean quitAllowed) { mQueue = new MessageQueue(quitAllowed); mThread = Thread.currentThread();}
我们知道,Handler的工作需要Looper,没有Looper的线程就会报错,那么如何创建Looper呢?其实很简单,通过Looper.prepare()即可为当前线程创建一个Looper,接着通过Looper.loop()来开启消息循环。
Looper除了prepare方法外,还提供了prepareMainLooper方法,这个方法主要是给主线程也就是ActivityThread创建Looper使用的,其本质也是通过prepare方法来实现的。由于主线程的Looper比较特殊,所以Looper提供了一个getMainLooper方法,通过它可以在任何地方获取到主线程的Looper。Looper也是可以退出的,Looper提供了quit 和 quitSafely来退出一个Looper,二者的区别是:quit会直接退出Looper,而quitSafely只是设定一个退出标记,然后吧消息队列中的已有消息处理完毕后才安全地退出。Looper退出后, 通过Handler发送的消息会失败,这个时候Handler的send方法会返回false。在子线程中,如果手动为其创建了Looper,那么在所有的事情完成以后应该调用quit方法来终止消息循环,否则这个子线程就会一直处于等待状态,而如果推出Looper以后,这个线程就会立刻终止,因此建议不需要的时候终止Looper。
Looper最重要的一个方法是loop方法,只有调用了loop方法,消息循环系统才会真正的起作用,它的实现如下
/** * Run the message queue in this thread. Be sure to call * {@link #quit()} to end the loop. */public static void loop() { final Looper me = myLooper(); if (me == null) { throw new RuntimeException("No Looper; Looper.prepare() wasn't called on this thread."); } final MessageQueue queue = me.mQueue; // Make sure the identity of this thread is that of the local process, // and keep track of what that identity token actually is. Binder.clearCallingIdentity(); final long ident = Binder.clearCallingIdentity(); for (;;) { Message msg = queue.next(); // might block if (msg == null) { // No message indicates that the message queue is quitting. return; } // This must be in a local variable, in case a UI event sets the logger final Printer logging = me.mLogging; if (logging != null) { logging.println(">>>>> Dispatching to " + msg.target + " " + msg.callback + ": " + msg.what); } final long traceTag = me.mTraceTag; if (traceTag != 0 && Trace.isTagEnabled(traceTag)) { Trace.traceBegin(traceTag, msg.target.getTraceName(msg)); } try { msg.target.dispatchMessage(msg); } finally { if (traceTag != 0) { Trace.traceEnd(traceTag); } } if (logging != null) { logging.println("<<<<< Finished to " + msg.target + " " + msg.callback); } // Make sure that during the course of dispatching the // identity of the thread wasn't corrupted. final long newIdent = Binder.clearCallingIdentity(); if (ident != newIdent) { Log.wtf(TAG, "Thread identity changed from 0x" + Long.toHexString(ident) + " to 0x" + Long.toHexString(newIdent) + " while dispatching to " + msg.target.getClass().getName() + " " + msg.callback + " what=" + msg.what); } msg.recycleUnchecked(); }}
Looper的loop方法的工作过程也比较好理解,loop方法是一个死循环,唯一跳出死循环的方式就是MessageQueue的next方法返回了null。当Looper的quit方法被调用时,Looper就会调用MessageQueue的quit或者quitSafely方法来通知消息队列退出,当消息队列被标记为退出状态时,它的next方法就会返回null。也就是说,Looper必须退出,否则loop方法就会无限循环下去。loop方法会调用MessageQueue的next方法来获取新消息,而next是一个阻塞操作,当没有消息是,next方法会一直阻塞在那里,这也导致loop方法一直阻塞在那里。如果MessageQueue的next方法返回了新消息,Looper就会处理这条消息:
msg.target.dispatchMessage(msg); 这里msg.target是指发生这条消息的Handler对象,这样Handler发生的消息最终又交给它的dispatchMessage方法来处理了。但这里不同的是,Handler的dispatchMessage方法是在创建Handler时所使用的Looper中执行的,这样就成功地将代码逻辑切换到指定的线程中去执行了。
4. Handler工作原理
Handler的工作主要包含消息的发送和接收过程。消息发送可以通过post的一系列方法以及send的一系统方法来实现,post的一系列方法最终是通过send的一系列方法来实现的。发送一条消息的典型过程如下所示。
public final boolean sendMessage(Message msg){ return sendMessageDelayed(msg, 0);}public final boolean sendMessageDelayed(Message msg, long delayMillis){ if (delayMillis < 0) { delayMillis = 0; } return sendMessageAtTime(msg, SystemClock.uptimeMillis() + delayMillis);}public boolean sendMessageAtTime(Message msg, long uptimeMillis) { MessageQueue queue = mQueue; if (queue == null) { RuntimeException e = new RuntimeException( this + " sendMessageAtTime() called with no mQueue"); Log.w("Looper", e.getMessage(), e); return false; } return enqueueMessage(queue, msg, uptimeMillis);}private boolean enqueueMessage(MessageQueue queue, Message msg, long uptimeMillis) { msg.target = this; if (mAsynchronous) { msg.setAsynchronous(true); } return queue.enqueueMessage(msg, uptimeMillis);}
可以发现, Handler发送消息的过程仅仅是向消息队列插入了一条消息,MessageQueue的next方法就会返回这条消息给Looper,Looper收到消息后就开始处理了,最终消息由Looper交由Handler处理,即Handler的dispatchMessage方法会被调用,这时Handler就进入了处理消息的阶段。
public void dispatchMessage(Message msg) { if (msg.callback != null) { handleCallback(msg); } else { if (mCallback != null) { if (mCallback.handleMessage(msg)) { return; } } handleMessage(msg); }}
Handler处理消息的过程如下:
首先,检查Message的callback是否为null,不为null就通过handleCallback来处理消息,Message的callback是一个Runnable对象,实际上就是Handler的post方法所传递的Runnable参数。
private static void handleCallback(Message message) { message.callback.run();}
其次,检查mCallback是否为null,不为null就调用mCallback的handleMessage方法来处理消息。Callback是个接口。
/** * Callback interface you can use when instantiating a Handler to avoid * having to implement your own subclass of Handler. * * @param msg A {@link android.os.Message Message} object * @return True if no further handling is desired */public interface Callback { public boolean handleMessage(Message msg);}
通过Callback可以采用如下方式来创建Handler对象,Handler handler = new Handler(callback);那么Callback的意义又是什么呢?源码里面的注释已经做了说明,可以用来创建一个Handler的实例但并不需要派生Handler的子类。在日常开发中,创建Handler最常见的方式就是派生一个Handler的子类,并重写其handleMessage方法来处理具体的消息,而Callback给我们提供了另一种使用Handler的方式,当我们不想派生子类时,就可以通过Callback来实现。
最后,调用Handler的handlerMessage方法来处理消息。
三、主线程消息循环
Android的主线程就是ActivityThread,主线程的入口方法为main,在main方法中系统会通过Looper.prepareMainLooper()来创建主线程的Looper以及MessageQueue,并通过Looper.loop()来开启主线程的消息循环
public static void main(String[] args) { // 代码省略... Process.setArgV0("" ); // 1. 创建消息循环Looper, 就是UI线程的消息队列 Looper.prepareMainLooper(); // 启动ActivityThread, 这里最终会启动应用程序 ActivityThread thread = new ActivityThread(); thread.attach(false); if (sMainThreadHandler == null) { sMainThreadHandler = thread.getHandler(); } Looper.loop(); // 2. 执行消息循环 // 代码省略...}
主线程的消息循环开始了之后,ActivityThread还需要一个Handler来和消息队列进行交互,这个Handler就是ActivityThread.H,它内部定义了一组消息类型,主要包含了四大组件的启动和停止等过程。
private class H extends Handler { public static final int LAUNCH_ACTIVITY = 100; public static final int PAUSE_ACTIVITY = 101; public static final int PAUSE_ACTIVITY_FINISHING= 102; public static final int STOP_ACTIVITY_SHOW = 103; public static final int STOP_ACTIVITY_HIDE = 104; public static final int SHOW_WINDOW = 105; public static final int HIDE_WINDOW = 106; public static final int RESUME_ACTIVITY = 107; public static final int SEND_RESULT = 108; public static final int DESTROY_ACTIVITY = 109; public static final int BIND_APPLICATION = 110; public static final int EXIT_APPLICATION = 111; public static final int NEW_INTENT = 112; public static final int RECEIVER = 113; public static final int CREATE_SERVICE = 114; public static final int SERVICE_ARGS = 115; public static final int STOP_SERVICE = 116; ...}
ActivityThread通过ApplicationThread和AMS进行进程间通信,AMS以进程间通信的方式完成ActivityThread的请求后会回调ApplicationThread中的Binder方法,然后ApplicationThread会向H发送消息,H收到消息后会将ApplicationThread中的逻辑切换到ActivityThread中去执行,即切换到主线程中去执行,这个过程就是主线程的消息循环模型。
四、深入了解Android的消息机制
Message、MessageQueue、Looper、Handler的工作原理像是工厂的生产线,Looper就是发动机,MessageQueue就是传送带,Handler就是工人,Message则是待处理的产品。它们的结构图如下:
Handler中的Message对象回收池:
/** * Return a new Message instance from the global pool. Allows us to * avoid allocating new objects in many cases. */public static Message obtain() { synchronized (sPoolSync) { if (sPool != null) { Message m = sPool; sPool = m.next; m.next = null; m.flags = 0; // clear in-use flag sPoolSize--; return m; } } return new Message();}/** * Return a Message instance to the global pool. * * You MUST NOT touch the Message after calling this function because it has * effectively been freed. It is an error to recycle a message that is currently * enqueued or that is in the process of being delivered to a Handler. *
*/public void recycle() { if (isInUse()) { // 判断是否该消息还在使用 if (gCheckRecycle) { throw new IllegalStateException("This message cannot be recycled because it " + "is still in use."); } return; } recycleUnchecked(); // 清空状态,并且将消息添加到消息池中}/** * Recycles a Message that may be in-use. * Used internally by the MessageQueue and Looper when disposing of queued Messages. */void recycleUnchecked() { // 清空消息状态,设置该消息in-use flag flags = FLAG_IN_USE; what = 0; arg1 = 0; arg2 = 0; obj = null; replyTo = null; sendingUid = -1; when = 0; target = null; callback = null; data = null; synchronized (sPoolSync) { // 回收消息到消息池中 if (sPoolSize < MAX_POOL_SIZE) { next = sPool; sPool = this; sPoolSize++; } }}
学习摘录于《Android开发艺术探索》第10章 & 《Android设计模式》第22章
更多相关文章
- Android笔记 从init到SystemServer
- 【Android】IPC、AIDL、Binder
- Android(安卓)多线程:线程池理解和使用总结
- [Android]ScrollView和ListView套用冲突的解决方法
- android英语字典(内含源码哦)
- android 中使文本(TextView 、button等可参考)在屏幕正中心显示的
- android 取消标题,程序意外停止
- Android消息机制不完全解析(上)
- Android/java 多线程(六)-AsyncTask使用详解及源码分析