scrollTo 以及 scrollBy方法使用说明
scrollBy这两个函数的区别 。
首先 ,我们必须明白在Android View视图是没有边界的,Canvas是没有边界的,只不过我们通过绘制特定的View时对
Canvas对象进行了一定的操作,例如 : translate(平移)、clipRect(剪切)等,以便达到我们的对该Canvas对象绘制的要求 ,
我们可以将这种无边界的视图称为“视图坐标”-----它不受物理屏幕限制。通常我们所理解的一个Layout布局文件只是该视
图的显示区域,超过了这个显示区域将不能显示到父视图的区域中 ,对应的,我们可以将这种有边界的视图称为“布局坐标”
------ 父视图给子视图分配的布局(layout)大小。而且, 一个视图的在屏幕的起始坐标位于视图坐标起始处,如下图所示。
这么来说吧 ,世界本是无边无界的,可是我们的眼睛我们的心约束了我们所看到的“世界” 。
如下所示:
黑色框框表示该子视图的布局坐标, 褐色框框表示该子视图的视图坐标--该坐标是无限的,超过了父视图给子视图
规定的区域后,不再显示该超出内容。
那么下面的问题就是:如何将我们的视图的任意坐标能显示到该视图的中心坐标上呢? 由于该布局位置是只能显示特定的
一块视图内容 ,因此我们需要通过scrollTo()或者scrollBy()方法将我们期望的视图“滚动”至布局坐标上。
在View.java中提供了了如下两个变量以及相应的属性方法去读取滚动值 ,如下: View.java类中
[java] view plain copy print ?- /**
- *Theoffset,inpixels,bywhichthecontentofthisviewisscrolled
- *horizontally.
- *{@hide}
- */
- protectedintmScrollX;//该视图内容相当于视图起始坐标的偏移量,X轴方向
- /**
- *Theoffset,inpixels,bywhichthecontentofthisviewisscrolled
- *vertically.
- *{@hide}
- */
- protectedintmScrollY;//该视图内容相当于视图起始坐标的偏移量,Y轴方向
- /**
- *Returnthescrolledleftpositionofthisview.Thisistheleftedgeof
- *thedisplayedpartofyourview.Youdonotneedtodrawanypixels
- *fartherleft,sincethoseareoutsideoftheframeofyourviewon
- *screen.
- *
- *@returnTheleftedgeofthedisplayedpartofyourview,inpixels.
- */
- publicfinalintgetScrollX(){
- returnmScrollX;
- }
- /**
- *Returnthescrolledtoppositionofthisview.Thisisthetopedgeof
- *thedisplayedpartofyourview.Youdonotneedtodrawanypixelsabove
- *it,sincethoseareoutsideoftheframeofyourviewonscreen.
- *
- *@returnThetopedgeofthedisplayedpartofyourview,inpixels.
- */
- publicfinalintgetScrollY(){
- returnmScrollY;
- }
/** * The offset, in pixels, by which the content of this view is scrolled * horizontally. * {@hide} */protected int mScrollX; //该视图内容相当于视图起始坐标的偏移量 , X轴 方向/** * The offset, in pixels, by which the content of this view is scrolled * vertically. * {@hide} */protected int mScrollY; //该视图内容相当于视图起始坐标的偏移量 , Y轴方向/** * Return the scrolled left position of this view. This is the left edge of * the displayed part of your view. You do not need to draw any pixels * farther left, since those are outside of the frame of your view on * screen. * * @return The left edge of the displayed part of your view, in pixels. */ public final int getScrollX() { return mScrollX; } /** * Return the scrolled top position of this view. This is the top edge of * the displayed part of your view. You do not need to draw any pixels above * it, since those are outside of the frame of your view on screen. * * @return The top edge of the displayed part of your view, in pixels. */ public final int getScrollY() { return mScrollY; }
注意,所谓的“by which the content of this view is scrolled”表示该偏移量只针对于该View中onDraw()方法里的
具体内容实现,而不针对绘制背景图片等 。具体原因可参考<Android中View绘制流程以及invalidate()等相关方法分析>
提示:下文中提到的当前视图内容是在绘制在布局坐标处的内容。
public void scrollTo(int x, int y)
说明:在当前视图内容偏移至(x , y)坐标处,即显示(可视)区域位于(x , y)坐标处。
方法原型为: View.java类中
[java] view plain copy print ?- /**
- *Setthescrolledpositionofyourview.Thiswillcauseacallto
- *{@link#onScrollChanged(int,int,int,int)}andtheviewwillbe
- *invalidated.
- *@paramxthexpositiontoscrollto
- *@paramytheypositiontoscrollto
- */
- publicvoidscrollTo(intx,inty){
- //偏移位置发生了改变
- if(mScrollX!=x||mScrollY!=y){
- intoldX=mScrollX;
- intoldY=mScrollY;
- mScrollX=x;//赋新值,保存当前便宜量
- mScrollY=y;
- //回调onScrollChanged方法
- onScrollChanged(mScrollX,mScrollY,oldX,oldY);
- if(!awakenScrollBars()){
- invalidate();//一般都引起重绘
- }
- }
- }
/** * Set the scrolled position of your view. This will cause a call to * {@link #onScrollChanged(int, int, int, int)} and the view will be * invalidated. * @param x the x position to scroll to * @param y the y position to scroll to */ public void scrollTo(int x, int y) { //偏移位置发生了改变 if (mScrollX != x || mScrollY != y) { int oldX = mScrollX; int oldY = mScrollY; mScrollX = x; //赋新值,保存当前便宜量 mScrollY = y; //回调onScrollChanged方法 onScrollChanged(mScrollX, mScrollY, oldX, oldY); if (!awakenScrollBars()) { invalidate(); //一般都引起重绘 } } }
public voidscrollBy(int x, int y)
说明:在当前视图内容继续偏移(x , y)个单位,显示(可视)区域也跟着偏移(x,y)个单位。
方法原型为: View.java类中
[java] view plain copy print ?- /**
- *Movethescrolledpositionofyourview.Thiswillcauseacallto
- *{@link#onScrollChanged(int,int,int,int)}andtheviewwillbe
- *invalidated.
- *@paramxtheamountofpixelstoscrollbyhorizontally
- *@paramytheamountofpixelstoscrollbyvertically
- */
- //看出原因了吧。。mScrollX与mScrollY代表我们当前偏移的位置,在当前位置继续偏移(x,y)个单位
- publicvoidscrollBy(intx,inty){
- scrollTo(mScrollX+x,mScrollY+y);
- }
/** * Move the scrolled position of your view. This will cause a call to * {@link #onScrollChanged(int, int, int, int)} and the view will be * invalidated. * @param x the amount of pixels to scroll by horizontally * @param y the amount of pixels to scroll by vertically */ // 看出原因了吧 。。 mScrollX 与 mScrollY 代表我们当前偏移的位置 , 在当前位置继续偏移(x ,y)个单位 public void scrollBy(int x, int y) { scrollTo(mScrollX + x, mScrollY + y); }
第一个小Demo非常简单 ,大家重点理解与掌握scrollTo() 与 scrollBy()函数的用法和区别。
第二个小Demo则有了Launcher的模样,能够左右切换屏幕 。实现功能如下: 采用了一个自定义ViewGroup,该ViewGroup
对象包含了3个LinearLayout子视图,并且以一定的布局坐标(由layout()方法指定)显示在ViewGroup上。 接下来,即可调用该
ViewGroup对象的scrollTo或者scrollBy()方法切换指定视图内容了,即切换屏幕。 呵呵 ,挺好玩的吧 。
如果对View绘制流程不懂的,可以参考我的这篇博客<Android中View绘制流程以及invalidate()等相关方法分析> 。
截图如下:
自定义ViewGroup如下:
[java] view plain copy print ?
- //自定义ViewGroup,包含了三个LinearLayout控件,存放在不同的布局位置,通过scrollBy或者scrollTo方法切换
- publicclassMultiViewGroupextendsViewGroup{
- privateContextmContext;
- privatestaticStringTAG="MultiViewGroup";
- publicMultiViewGroup(Contextcontext){
- super(context);
- mContext=context;
- init();
- }
- publicMultiViewGroup(Contextcontext,AttributeSetattrs){
- super(context,attrs);
- mContext=context;
- init();
- }
- privatevoidinit(){
- //初始化3个LinearLayout控件
- LinearLayoutoneLL=newLinearLayout(mContext);
- oneLL.setBackgroundColor(Color.RED);
- addView(oneLL);
- LinearLayouttwoLL=newLinearLayout(mContext);
- twoLL.setBackgroundColor(Color.YELLOW);
- addView(twoLL);
- LinearLayoutthreeLL=newLinearLayout(mContext);
- threeLL.setBackgroundColor(Color.BLUE);
- addView(threeLL);
- }
- //measure过程
- @Override
- protectedvoidonMeasure(intwidthMeasureSpec,intheightMeasureSpec){
- Log.i(TAG,"---startonMeasure--");
- //设置该ViewGroup的大小
- intwidth=MeasureSpec.getSize(widthMeasureSpec);
- intheight=MeasureSpec.getSize(heightMeasureSpec);
- setMeasuredDimension(width,height);
- intchildCount=getChildCount();
- Log.i(TAG,"---onMeasurechildCountis-->"+childCount);
- for(inti=0;i<childCount;i++){
- Viewchild=getChildAt(i);
- //设置每个子视图的大小,即全屏
- child.measure(MultiScreenActivity.screenWidth,MultiScreenActivity.scrrenHeight);
- }
- }
- //layout过程
- @Override
- protectedvoidonLayout(booleanchanged,intl,intt,intr,intb){
- //TODOAuto-generatedmethodstub
- Log.i(TAG,"---startonLayout--");
- intstartLeft=0;//每个子视图的起始布局坐标
- intstartTop=10;//间距设置为10px相当于android:marginTop="10px"
- intchildCount=getChildCount();
- Log.i(TAG,"---onLayoutchildCountis-->"+childCount);
- for(inti=0;i<childCount;i++){
- Viewchild=getChildAt(i);
- child.layout(startLeft,startTop,
- startLeft+MultiScreenActivity.screenWidth,
- startTop+MultiScreenActivity.scrrenHeight);
- startLeft=startLeft+MultiScreenActivity.screenWidth;//校准每个子View的起始布局位置
- //三个子视图的在屏幕中的分布如下[0,320]/[320,640]/[640,960]
- }
- }
- }
//自定义ViewGroup , 包含了三个LinearLayout控件,存放在不同的布局位置,通过scrollBy或者scrollTo方法切换public class MultiViewGroup extends ViewGroup {private Context mContext;private static String TAG = "MultiViewGroup";public MultiViewGroup(Context context) {super(context);mContext = context;init();}public MultiViewGroup(Context context, AttributeSet attrs) {super(context, attrs);mContext = context;init();}private void init() {// 初始化3个 LinearLayout控件LinearLayout oneLL = new LinearLayout(mContext);oneLL.setBackgroundColor(Color.RED); addView(oneLL);LinearLayout twoLL = new LinearLayout(mContext);twoLL.setBackgroundColor(Color.YELLOW);addView(twoLL);LinearLayout threeLL = new LinearLayout(mContext);threeLL.setBackgroundColor(Color.BLUE);addView(threeLL);}// measure过程@Overrideprotected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {Log.i(TAG, "--- start onMeasure --");// 设置该ViewGroup的大小int width = MeasureSpec.getSize(widthMeasureSpec);int height = MeasureSpec.getSize(heightMeasureSpec);setMeasuredDimension(width, height);int childCount = getChildCount();Log.i(TAG, "--- onMeasure childCount is -->" + childCount);for (int i = 0; i < childCount; i++) {View child = getChildAt(i);// 设置每个子视图的大小 , 即全屏child.measure(MultiScreenActivity.screenWidth, MultiScreenActivity.scrrenHeight);}}// layout过程@Overrideprotected void onLayout(boolean changed, int l, int t, int r, int b) {// TODO Auto-generated method stubLog.i(TAG, "--- start onLayout --");int startLeft = 0; // 每个子视图的起始布局坐标int startTop = 10; // 间距设置为10px 相当于 android:marginTop= "10px"int childCount = getChildCount();Log.i(TAG, "--- onLayout childCount is -->" + childCount);for (int i = 0; i < childCount; i++) {View child = getChildAt(i);child.layout(startLeft, startTop, startLeft + MultiScreenActivity.screenWidth, startTop + MultiScreenActivity.scrrenHeight);startLeft = startLeft + MultiScreenActivity.screenWidth ; //校准每个子View的起始布局位置//三个子视图的在屏幕中的分布如下 [0 , 320] / [320,640] / [640,960]}}}
PS :大家可以分别给这几个LinearLayout试着添加几个子View,例如TextView, Button等。
至于Launcher上滑屏功能的实现,我尝试着去掌握,可能天资愚钝吧,对Scoller类很是感冒,现今还没有掌握好,不过在此
给大家推荐几个不错的学习资源 。以后有需要的话,还是采用拿来主义吧。 囧
1、 Scoller类介绍:android 中文 api (64) —— Scroller
2、相关资源汇总:http://blog.csdn.net/dellheng/article/details/7164275
3,launcher修改--左右滑动屏幕切换源码追踪
示例源代码位于:http://download.csdn.net/detail/qinjuning/4054840
更多相关文章
- [android|ViewPager]关于ViewPager如何阻止其滑动和一次切换多页
- [置顶] 超赞!!Android视图讲解!!以及Android内坐标分析!!!
- Android(安卓)Junit单元测试
- Android(安卓)PullToRefresh 分析之三、手势响应
- Android中LocationManager的简单使用,获取当前位置[转
- android中Intent的一些用法和总结
- Android数据绑定(DataBinding)
- 【Android-Emulator】Android模拟器介绍和基本使用
- android自定义ViewGroup基础