android蓝牙键盘调试记录
16lz
2021-01-23
情况:
android平板已经可以和蓝牙键盘连接,并可以输入文本等,大部分按键可以正常响应。但有少数几个按键不响应,ESC、锁屏键、搜索键。
调试步骤:
1.打开键盘输入的调试信息,以便获取按键的扫描码:
frameworks/base/services/input/InputReader.cpp
在方法InputDevice::process()可以看到打印信息如下:
这里重点关注Vendor=05ac Product=0239,根据对应规则:
Vendor__Product_.kl
应该在/system/usr/keylayout有文件Vendor_05ac_Product_0239.kl,
查看一下,的确有这个文件:
4.因为要求将ESC响应为BACK键,所以,在Generic.kl中找到BACK键的定义:
5.先将文件Vendor_05ac_Product_0239.kl提取到电脑中:
在Vendor_05ac_Product_0239.kl,增加一行即可:
6.修改完成后重新挂载system分区为可读写,再文件push到机器中,重启机器,查看是否修改成功:
android平板已经可以和蓝牙键盘连接,并可以输入文本等,大部分按键可以正常响应。但有少数几个按键不响应,ESC、锁屏键、搜索键。
调试步骤:
1.打开键盘输入的调试信息,以便获取按键的扫描码:
frameworks/base/services/input/InputReader.cpp
#define DEBUG_RAW_EVENTS 1//0 修改为1,打开调试信息
在方法InputDevice::process()可以看到打印信息如下:
#if DEBUG_RAW_EVENTS LOGD("Input event: device=%d type=0x%04x scancode=0x%04x " "keycode=0x%04x value=0x%08x flags=0x%08x", rawEvent->deviceId, rawEvent->type, rawEvent->scanCode, rawEvent->keyCode, rawEvent->value, rawEvent->flags);#endif
2.编译系统源码,升级固件,连接好蓝牙键盘,点击ESC键,观察打印消息中scancode的值,可以得到对应的scancode为0x000000ac,即172,这样就得到了扫描码。
3.在adb shell中查看输入设备信息:
[email protected]:/ $ cat /proc/bus/input/devices
I: Bus=0005 Vendor=05ac Product=0239 Version=0001N: Name="Bluetooth 3.0 Keyboard"...(略)
这里重点关注Vendor=05ac Product=0239,根据对应规则:
Vendor_
应该在/system/usr/keylayout有文件Vendor_05ac_Product_0239.kl,
查看一下,的确有这个文件:
[email protected]:/ $ ls /system/usr/keylayoutls /system/usr/keylayoutACCDET.klAVRCP.klGeneric.klVendor_045e_Product_028e.klVendor_046d_Product_c216.klVendor_046d_Product_c294.klVendor_046d_Product_c299.klVendor_046d_Product_c532.klVendor_054c_Product_0268.klVendor_05ac_Product_0239.klVendor_22b8_Product_093d.klmtk-kpd.klqwerty.kl
这里可以看到有很多输入设备的按键映射配置文件,其中Vendor_05ac_Product_0239.kl是蓝牙键盘的转换表。 4.因为要求将ESC响应为BACK键,所以,在Generic.kl中找到BACK键的定义:
[email protected]:/ $ cat /system/usr/keylayout/Generic.kl | busybox grep BACKcat /system/usr/keylayout/Generic.kl | busybox grep "BACK "key 158 BACK WAKE_DROPPED
5.先将文件Vendor_05ac_Product_0239.kl提取到电脑中:
e:\android\doc\bluetooth keyboard\keylayout>adb pull /system/usr/keylayoutpull: building file list...pull: /system/usr/keylayout/qwerty.kl -> ./qwerty.klpull: /system/usr/keylayout/mtk-kpd.kl -> ./mtk-kpd.klpull: /system/usr/keylayout/Vendor_22b8_Product_093d.kl -> ./Vendor_22b8_Product_093d.klpull: /system/usr/keylayout/Vendor_05ac_Product_0239.kl -> ./Vendor_05ac_Product_0239.klpull: /system/usr/keylayout/Vendor_054c_Product_0268.kl -> ./Vendor_054c_Product_0268.klpull: /system/usr/keylayout/Vendor_046d_Product_c532.kl -> ./Vendor_046d_Product_c532.klpull: /system/usr/keylayout/Vendor_046d_Product_c299.kl -> ./Vendor_046d_Product_c299.klpull: /system/usr/keylayout/Vendor_046d_Product_c294.kl -> ./Vendor_046d_Product_c294.klpull: /system/usr/keylayout/Vendor_046d_Product_c216.kl -> ./Vendor_046d_Product_c216.klpull: /system/usr/keylayout/Vendor_045e_Product_028e.kl -> ./Vendor_045e_Product_028e.klpull: /system/usr/keylayout/Generic.kl -> ./Generic.klpull: /system/usr/keylayout/AVRCP.kl -> ./AVRCP.klpull: /system/usr/keylayout/ACCDET.kl -> ./ACCDET.kl13 files pulled. 0 files skipped.262 KB/s (27925 bytes in 0.104s)
在Vendor_05ac_Product_0239.kl,增加一行即可:
key 172 BACK WAKE_DROPPED
6.修改完成后重新挂载system分区为可读写,再文件push到机器中,重启机器,查看是否修改成功:
e:\android\doc\bluetooth keyboard\keylayout>adb remounte:\android\doc\bluetooth keyboard\keylayout>adb push Vendor_05ac_Product_0239.kl /system/usr/keylayout/e:\android\doc\bluetooth keyboard\keylayout>adb reboot
7.同样方法,添加好锁屏键、搜索键,并验证好了,就可以把修改添加到源码中,重新编译,升级固件验证:
frameworks/base/data/keyboards/Vendor_05ac_Product_0239.kl
验证后,不要忘记去掉调试信息。
更多相关文章
- Android 设备屏幕信息(dip,sp,px的转换及其运用)
- android沉浸式+虚拟按键+Fragment+CoordinatorLayout(2)
- Android输入法框架中按键消息的处理流程
- 蓝牙协议
- Android得到已安装的应用程序信息!
- 【Android初学者】超简单的注册页面,填写完整信息实现 跳转 和 传