Android P WiFi 框架 以及 Enable相关流程
16lz
2021-01-23
文章目录
- Android P WiFi 框架
- Wifi 整体流程框架图
- 代码流程
- 1. WifiSettings --> WifiManager
- 2. WifiManager --> WifiService --> WifiServiceImpl -->WifiController
- 3. WifiController --> WifiStateMachinePrime
- 4. WifiStateMachinePrime --> ClientModeManager
- 5. ClientModeManager --> WifiNative
- 6. WifiNative--> WificondControl
Android P WiFi 框架
Android P相比于Android O的变化
- 多了WifiStateMachinePrime（状态机的前处理机制），wifiService的相关cmd 不再是直接send 给WifiStateMachine，而是被送到WifiStateMachinePrime先进行处理后，再送往WifiStateMachine
- 也多了一层ClientModeManager处理（将之前初始化wpa_supplicant专门抽出一层类在这里面来做），详细看后面的代码
Wifi 整体流程框架图
- 基本与Android O Wifi 主体框架一致
- 三板斧的套路还是被传承下来（1. Application <–> 2. WiFiService(WifiStateMachine) <–> 3. WifiNative（wpa_supplicant – wlan drv））
代码流程
1. WifiSettings --> WifiManager
点击 wifi button 开启wifi 触发的代码流程如下，
- wifiSettings 响应onPreferenceTreeClick 送往WifiEnable
- WifiEnabler 根据传入的状态，call WifiManager 设置wifi状态 （开启跳转到WifiServiceImpl）
packages/apps/Settings/src/com/android/settings/wifi/WifiSettings.java public boolean onPreferenceTreeClick(Preference preference){ ..... return super.onPreferenceTreeClick(preference); }packages/apps/Settings/src/com/android/settings/wifi/WifiEnabler.javapublic boolean onSwitchToggled(boolean isChecked){.... mWifiManager.setWifiEnabled(isChecked); // wifiManager 设置wifi 状态}2. WifiManager --> WifiService --> WifiServiceImpl -->WifiController
- 还是老套路，逐级进入WifiService，WifiServiceImpl ，WifiController，WifiStateMachinePrime，WifiNative 等完成CMD_WIFI_TOGGLED的火炬传递
- 注意随着Android 版本升级后，接递火炬CMD_WIFI_TOGGLED的顺序也发生了变化
- Android P 版本WifiServiceImpl 将CMD_WIFI_TOGGLED 先送到了WifiController处理，这里稍微有点儿复杂的状态机（都会涉及到处理此cmd），具体根据设备所处状态来跟就可以。（这里以设备从开机状态第一次打开wifi为场景进行说明，此case 直接会进入）
frameworks/base/wifi/java/android/net/wifi/WifiManager.javapublic boolean setWifiEnabled(boolean enabled){ return mService.setWifiEnabled(mContext.getOpPackageName(), enabled); // jump to WifiServiceImpl}frameworks/opt/net/wifi/service/java/com/android/server/wifi/WifiServiceImpl.javapublic synchronized boolean setWifiEnabled(String packageName, boolean enable){.... mWifiController.sendMessage(CMD_WIFI_TOGGLED);}frameworks/opt/net/wifi/service/java/com/android/server/wifi/WifiController.java class StaDisabledState extends State {.... public boolean processMessage(Message msg) {switch (msg.what) { case CMD_WIFI_TOGGLED: ..... transitionTo(mDeviceActiveState); // jump to DeviceActiveState }} class DeviceActiveState extends State { public void enter() { mWifiStateMachinePrime.enterClientMode(); // jump to WifiStateMachinePrime mWifiStateMachine.setHighPerfModeEnabled(false); } }3. WifiController --> WifiStateMachinePrime
- WifiStateMachinePrime 传递CMD_START_CLIENT_MODE，先在内部状态机完成一轮转动
- ModeStateMachine --> ClientModeActiveState
- 送往ClientModeManager 创建WifiClientModeManager 实例
frameworks/opt/net/wifi/service/java/com/android/server/wifi/WifiStateMachinePrime.javapublic void enterClientMode() {changeMode(ModeStateMachine.CMD_START_CLIENT_MODE);}private class ModeStateMachine extends StateMachine {... private boolean checkForAndHandleModeChange(Message message) { case ModeStateMachine.CMD_START_CLIENT_MODE: mModeStateMachine.transitionTo(mClientModeActiveState); //跳转到ClientModeActiveState } }class ClientModeActiveState extends ModeActiveState {public void enter() {mManager = mWifiInjector.makeClientModeManager(mListener); //创建ClientModeManager实例mManager.start(); //mActiveModeManagers.add(mManager);updateBatteryStatsWifiState(true);}}4. WifiStateMachinePrime --> ClientModeManager
- ClientModeManager 传递ClientModeStateMachine.CMD_START 开始wpa_supplicant初始化信号
- 更新 wifiState updateWifiState
- 通过WifiNative初始化Client Mode
frameworks/opt/net/wifi/service/java/com/android/server/wifi/ClientModeManager.javapublic void start() {mStateMachine.sendMessage(ClientModeStateMachine.CMD_START);}private class IdleState extends State {public boolean processMessage(Message message) { case CMD_START: updateWifiState(WifiManager.WIFI_STATE_ENABLING, WifiManager.WIFI_STATE_DISABLED);mClientInterfaceName = mWifiNative.setupInterfaceForClientMode( false /* not low priority */, mWifiNativeInterfaceCallback);if (TextUtils.isEmpty(mClientInterfaceName)) { Log.e(TAG, "Failed to create ClientInterface. Sit in Idle"); updateWifiState(WifiManager.WIFI_STATE_UNKNOWN, WifiManager.WIFI_STATE_ENABLING); updateWifiState(WifiManager.WIFI_STATE_DISABLED, WifiManager.WIFI_STATE_UNKNOWN); break;}sendScanAvailableBroadcast(false); //send wifi Scan Available BroadcastmScanRequestProxy.enableScanningForHiddenNetworks(false);mScanRequestProxy.clearScanResults();transitionTo(mStartedState); }}5. ClientModeManager --> WifiNative
- ClientModeManager 通过CMD_START 将启动传递给WifiNative
- WifiNative 启动wpa_supplicant service
- wifiNative 通过SupplicantStaHal 建立与 wpa_supplicant/hidl/1.1 的sta_iface.cpp 关联（ifaceName）
- wifiNative 向NetworkManagementService 注册NetworkObserverInternal 实例，用于监视 设备iface一举一动
- wifiNative 开启wifiMonitor ， 其开始接手所有的事项（消息以及事件），一有变化就上报framework(wifiStateMachine、wifiServiceImpl、SupplicantStaIfaceHal等等），就像是东厂的小兵，监视着下面的一举一动，一有变化马上上报头头
frameworks/opt/net/wifi/service/java/com/android/server/wifi/WifiNative.javapublic String setupInterfaceForClientMode(boolean lowPrioritySta, @NonNull InterfaceCallback interfaceCallback) {... startSupplicant(); // 启动 wpa_supplicant .. mWificondControl.setupInterfaceForClientMode(iface.name); // 初始化与wificondcontrol 关联(用于后续wificond 作为framework与 wpa_supplicant 之间的通信信使 .. mSupplicantStaIfaceHal.setupIface(iface.name); // mWifiMonitor.startMonitoring(iface.name); // 启动WifiMonitor 上报所有的wpa_supplicant msg&event initializeNwParamsForClientInterface(iface.name);}6. WifiNative–> WificondControl
- WificondControl 通过 binder 连接到wificond （server.cpp），创建ClientInterface
- WificondControl 通过binder 连接到 client_interface_binder.cpp 获取 wificondScaner ，用于wifi scan（上报scan results）
- WificondControl 创建 pnoScan + Scan Event Handler ， 且将之与设备 ifaceName 关联
frameworks/opt/net/wifi/service/java/com/android/server/wifi/WificondControl.javaframeworks/opt/net/wifi/service/java/com/android/server/wifi/WificondControl.java public IClientInterface setupInterfaceForClientMode(@NonNull String ifaceName){ ... clientInterface = mWificond.createClientInterface(ifaceName); //创建ClientInterface .. mClientInterfaces.put(ifaceName, clientInterface); IWifiScannerImpl wificondScanner = clientInterface.getWifiScannerImpl(); // 获取WifiScannerImpl PnoScanEventHandler pnoScanEventHandler = new PnoScanEventHandler(ifaceName); mPnoScanEventHandlers.put(ifaceName, pnoScanEventHandler); wificondScanner.subscribePnoScanEvents(pnoScanEventHandler);}更多相关文章
- Android Studio 配置 androidAnnotations框架详细步骤
- Android屏幕中隐藏标题栏和状态栏
- Android完全隐藏状态栏，毛都不剩的那种！！！
- android 开发过程中对网络状态的判断的工具类
- 指纹识别分析之enroll流程
- android studio第三方框架总结
- 状态栏去掉机主图标
- Android视图绘制流程完全解析，带你一步步深入了解View(四)
- Android BLE学习（二）： Android与51822蓝牙模块通信流程的实现与分析