Android之——自动挂断电话的实现

转载请注明出处:http://blog.csdn.net/l1028386804/article/details/47072451

通过《Android之——AIDL小结》与《Android之——AIDL深入》两篇博文，相信大家已经对Android AIDL有了一定的了解，下面，我们就利用Android的AIDL实现自动挂断电话的功能，好了，不多说了，我们直接进入主题。

1、准备AIDL文件

挂断电话的AIDL文件都是Android自带的文件，我们可以从Android的源代码中找到这两个文件，它们分别是NeighboringCellInfo.aidl和ITelephony.aidl

我把NeighboringCellInfo.aidl放在项目的android.telephony包下，将ITelephony.aidl放在com.android.internal.telephony包下

NeighboringCellInfo.aid具体内容如下:

/* //device/java/android/android/content/Intent.aidl**** Copyright 2007, The Android Open Source Project**** Licensed under the Apache License, Version 2.0 (the "License");** you may not use this file except in compliance with the License.** You may obtain a copy of the License at****     http://www.apache.org/licenses/LICENSE-2.0**** Unless required by applicable law or agreed to in writing, software** distributed under the License is distributed on an "AS IS" BASIS,** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.** See the License for the specific language governing permissions and** limitations under the License.*/package android.telephony;parcelable NeighboringCellInfo;

ITelephony.aidl具体内容如下：

/* * Copyright (C) 2007 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * *      http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */package com.android.internal.telephony;import android.os.Bundle;import java.util.List;import android.telephony.NeighboringCellInfo;/** * Interface used to interact with the phone.  Mostly this is used by the * TelephonyManager class.  A few places are still using this directly. * Please clean them up if possible and use TelephonyManager insteadl. * * {@hide} */interface ITelephony {    /**     * Dial a number. This doesn't place the call. It displays     * the Dialer screen.     * @param number the number to be dialed. If null, this     * would display the Dialer screen with no number pre-filled.     */    void dial(String number);    /**     * Place a call to the specified number.     * @param number the number to be called.     */    void call(String number);    /**     * If there is currently a call in progress, show the call screen.     * The DTMF dialpad may or may not be visible initially, depending on     * whether it was up when the user last exited the InCallScreen.     *     * @return true if the call screen was shown.     */    boolean showCallScreen();    /**     * Variation of showCallScreen() that also specifies whether the     * DTMF dialpad should be initially visible when the InCallScreen     * comes up.     *     * @param showDialpad if true, make the dialpad visible initially,     *                    otherwise hide the dialpad initially.     * @return true if the call screen was shown.     *     * @see showCallScreen     */    boolean showCallScreenWithDialpad(boolean showDialpad);    /**     * End call or go to the Home screen     *     * @return whether it hung up     */    boolean endCall();    /**     * Answer the currently-ringing call.     *     * If there's already a current active call, that call will be     * automatically put on hold.  If both lines are currently in use, the     * current active call will be ended.     *     * TODO: provide a flag to let the caller specify what policy to use     * if both lines are in use.  (The current behavior is hardwired to     * "answer incoming, end ongoing", which is how the CALL button     * is specced to behave.)     *     * TODO: this should be a oneway call (especially since it's called     * directly from the key queue thread).     */    void answerRingingCall();    /**     * Silence the ringer if an incoming call is currently ringing.     * (If vibrating, stop the vibrator also.)     *     * It's safe to call this if the ringer has already been silenced, or     * even if there's no incoming call.  (If so, this method will do nothing.)     *     * TODO: this should be a oneway call too (see above).     *       (Actually *all* the methods here that return void can     *       probably be oneway.)     */    void silenceRinger();    /**     * Check if we are in either an active or holding call     * @return true if the phone state is OFFHOOK.     */    boolean isOffhook();    /**     * Check if an incoming phone call is ringing or call waiting.     * @return true if the phone state is RINGING.     */    boolean isRinging();    /**     * Check if the phone is idle.     * @return true if the phone state is IDLE.     */    boolean isIdle();    /**     * Check to see if the radio is on or not.     * @return returns true if the radio is on.     */    boolean isRadioOn();    /**     * Check if the SIM pin lock is enabled.     * @return true if the SIM pin lock is enabled.     */    boolean isSimPinEnabled();    /**     * Cancels the missed calls notification.     */    void cancelMissedCallsNotification();    /**     * Supply a pin to unlock the SIM.  Blocks until a result is determined.     * @param pin The pin to check.     * @return whether the operation was a success.     */    boolean supplyPin(String pin);    /**     * Handles PIN MMI commands (PIN/PIN2/PUK/PUK2), which are initiated     * without SEND (so <code>dial</code> is not appropriate).     *     * @param dialString the MMI command to be executed.     * @return true if MMI command is executed.     */    boolean handlePinMmi(String dialString);    /**     * Toggles the radio on or off.     */    void toggleRadioOnOff();    /**     * Set the radio to on or off     */    boolean setRadio(boolean turnOn);    /**     * Request to update location information in service state     */    void updateServiceLocation();    /**     * Enable location update notifications.     */    void enableLocationUpdates();    /**     * Disable location update notifications.     */    void disableLocationUpdates();    /**     * Enable a specific APN type.     */    int enableApnType(String type);    /**     * Disable a specific APN type.     */    int disableApnType(String type);    /**     * Allow mobile data connections.     */    boolean enableDataConnectivity();    /**     * Disallow mobile data connections.     */    boolean disableDataConnectivity();    /**     * Report whether data connectivity is possible.     */    boolean isDataConnectivityPossible();    Bundle getCellLocation();    /**     * Returns the neighboring cell information of the device.     */    List<NeighboringCellInfo> getNeighboringCellInfo();     int getCallState();     int getDataActivity();     int getDataState();    /**     * Returns the current active phone type as integer.     * Returns TelephonyManager.PHONE_TYPE_CDMA if RILConstants.CDMA_PHONE     * and TelephonyManager.PHONE_TYPE_GSM if RILConstants.GSM_PHONE     */    int getActivePhoneType();    /**     * Returns the CDMA ERI icon index to display     */    int getCdmaEriIconIndex();    /**     * Returns the CDMA ERI icon mode,     * 0 - ON     * 1 - FLASHING     */    int getCdmaEriIconMode();    /**     * Returns the CDMA ERI text,     */    String getCdmaEriText();    /**     * Returns true if CDMA provisioning needs to run.     */    boolean getCdmaNeedsProvisioning();    /**      * Returns the unread count of voicemails      */    int getVoiceMessageCount();    /**      * Returns the network type      */    int getNetworkType();        /**     * Return true if an ICC card is present     */    boolean hasIccCard();}

准备好文件后，会在项目的gen目录下自动生成与两个文件所在包一样的包，同时会自动生成ITelephony.java文件

如下图:

Android之——自动挂断电话的实现_第1张图片

2、新建PhoneUtils类，并写一个方法endCall()

这个方法就是挂断电话的方法，具体实现如下

//挂断电话public void endCall(String incomingNumber){try {Class<?> clazz = Class.forName("android.os.ServiceManager");Method method = clazz.getMethod("getService", String.class);IBinder ibinder = (IBinder) method.invoke(null, Context.TELEPHONY_SERVICE);ITelephony iTelephony = ITelephony.Stub.asInterface(ibinder);iTelephony.endCall();}catch(Exception e){e.printStrackTrace();}}

3、注册权限

最后别忘了在AndroidManifest.xml文件中注册权限

具体实现如下:

<uses-permission android:name="android.permission.CALL_PHONE"/>

转载请注明出处:http://blog.csdn.net/l1028386804/article/details/47072451

1、准备AIDL文件

2、新建PhoneUtils类，并写一个方法endCall()

3、注册权限

更多相关文章

随机推荐