Recovery简介
Android利用Recovery模式,进行恢复出厂设置,OTA升级,patch升级及firmware升级。
升级一般通过运行升级包中的META-INF/com/google/android/update-script脚本来执行自定义升级,脚本中是一组recovery系统能识别的UI控制,文件系统操作命令,例如write_raw_image(写FLASH分区),copy_dir(复制目录)。该包一般被下载至SDCARD和CACHE分区下。如果对该包内容感兴趣,可以从http://forum.xda-developers.com/showthread.php?t=442480下载JF升级包来看看。
升级中还涉及到包的数字签名,签名方式和普通JAR文件签名差不错。公钥会被硬编译入recovery,编译时生成在:out/target/product/XX/obj/PACKAGING/ota_keys_inc_intermediates/keys.inc
G1中的三种启动模式
        MAGIC KEY:


  • camera +
            power:bootloader模式,ADP里则可以使用fastboot模式
           

  • home + power:recovery模式
           

  • 正常启动


        Bootloader正常启动,又有三种方式,按照BCB(Bootloader
Control Block, 下节介绍)中的command分类:


  • command == 'boot-recovery'
            → 启动recovery.img。recovery模式
           

  • command ==
            'update-radio/hboot' → 更新firmware(bootloader)
           

  • 其他 → 启动boot.img


Recovery涉及到的其他系统及文件

  • CACHE分区文件


 

  • Recovery
            工具通过NAND
            cache分区上的三个文件和主系统打交道。主系统(包括恢复出厂设置和OTA升级)可以写入recovery所需的命令,读出recovery过程中的LOG和intent。
    • /cache/recovery/command:
                      recovery命令,由主系统写入。所有命令如下:
                     
      • --send_intent=anystring
                                - write the text out to recovery.intent
                               
      • --update_package=root:path
                                - verify install an OTA package file
                               
      • --wipe_data
                                - erase user data (and cache), then reboot
                               
      • --wipe_cache
                                - wipe cache (but not user data), then reboot
                       

                     
    • /cache/recovery/log:recovery过程日志,由主系统读出
                     
    • /cache/recovery/intent:recovery输出的intent
             
  • MISC分区内容
           
    Bootloader Control Block
            (BCB) 存放recovery
            bootloader message。结构如下:
           
    struct
            bootloader_message {
           

    • char
                      command[32];
      char
                      status[32];  // 未知用途
      char
                      recovery[1024];

           
    };
           

    • command可以有以下两个值
                     
      “boot-recovery”:标示recovery正在进行,或指示bootloader应该进入recovery
                      mode
                     
      “update-hboot/radio”:指示bootloader更新firmware
                     

    • recovery内容
                     
      “recovery\n
                     
      \n
                     

                     
      其中recovery
                      command为CACHE:/recovery/command命令
             


两种Recovery
Case

  • FACTORY
            RESET(恢复出厂设置)


 

用户选择“恢复出厂设置”
        设置系统将"--wipe_data"命令写入/cache/recovery/command
        系统重启,并进入recover模式(/sbin/recovery)
        get_args()
        将
        "boot-recovery"和"--wipe_data"写入BCB
        erase_root()
        格式化(擦除)DATA分区
        erase_root()
        格式化(擦除)CACHE分区
        finish_recovery()
        擦除BCB
        重启系统

  • OTA
            INSTALL(OTA升级)

升级系统下载
        OTA包到/cache/some-filename.zip
        升级系统写入recovery命令"--update_package=CACHE:some-filename.zip"
        重启,并进入recovery模式
        get_args()
        将"boot-recovery"
        和
        "--update_package=..."
        写入BCB
        install_package()
        作升级
        finish_recovery()
        擦除 BCB
        **
        如果安装包失败 **
        prompt_and_wait() 等待用户操作,选择ALT+S或ALT+W
        升级或恢复出厂设置
        main()
        调用
        maybe_install_firmware_update()
        如果包里有hboot/radio的firmware则继续,否则返回
                将
                "boot-recovery"
                和 "--wipe_cache"
                写入BCB
                将
                firmware image写入cache分区
                将
                "update-radio/hboot"
                和 "--wipe_cache"
                写入BCB
                重启系统
                bootloader自身更新firmware
                bootloader
                将 "boot-recovery"
                写入BCB
                erase_root()
                擦除CACHE分区
                清除
                BCB
       
        main()
        调用 reboot()
        重启系统
Recovery模式流程
/init
→ init.rc →
/sbin/recovery →
main():recovery.c
  • ui_init():ui.c
             [UI initialize]
           
    • gr_init():minui/graphics.c
                       [set tty0 to graphic
                      mode, open fb0]
                     
    • ev_init():minui/events.c
                       [open /dev/input/event*]
                     
    • res_create_surface:minui/resource.c
                       [create surfaces for all bitmaps used later, include icons, bmps]
                     
    • create
                      2 threads: progress/input_thread [create progress show and input
                      event handler thread]
             

           
  • get_args():recovery.c
           
    • get_bootloader_message():bootloader.c
                       [read mtdblock0(misc partition) 2nd page for
                      commandline]
                     
    • check
                      if nand misc partition has boot message. If yes, fill argc/argv.
                     
    • If
                      no, get arguments from /cache/recovery/command, and fill argc/argv.
                     
    • set_bootloader_message():bootloader.c
                       [set bootloader message back to mtdblock0]
             

           
  • Parser
            argv[] filled above
           
  • register_update_commands():commands.c
            [ register all commands with name and hook function ]
           
    • registerCommand():commands.c
                     
                     
                     
      • Register
                                command with name, hook, type, cookie.
                               
      • Commands,
                                e.g: assert, delete, copy_dir, symlink, write_raw_image.
                       

                     
    • registerFunction():commands.c
                     
      • Register
                                function with name, hook, cookie.
                               
      • Function,
                                e.g: get_mark, matches, getprop, file_contains
                       

             

           
  • install_package():
           
    • translate_root_path():roots.c
                       [ "SYSTEM:lib" and turns it into a string like
                      "/system/lib", translate the updater.zip path ]
                     
    • mzOpenZipArchive():zip.c
                       [ open updater.zip file (uncompass) ]
                     
    • handle_update_package():install.c
                     
      • verify_jar_signature():verifier.c
                                 [ verify signature with keys.inc key; verify manifest and zip
                                package archive ]
                               
        • verifySignature()
                                           [ verify the signature file: CERT.sf/rsa. ]
                                         
          • digestEntry():verifier.c
                                                     [ get SHA-1 digest of CERT.sf file ]
                                                   
          • RSA_verify(public
                                                    key:keys.inc, signature:CERT.rsa, CERT.sf's digest):libc/rsa.c
                                                    [ Verify a 2048 bit RSA PKCS1.5 signature against an expected
                                                    SHA-1 hash. Use public key to decrypt the CERT.rsa to get
                                                    original SHA digest, then compare to digest of CERT.sf ]
                                           

                                         
        • verifyManifest()
                                           [ Get manifest SHA1-Digest from CERT.sf. Then do  digest to
                                          MANIFEST.MF. Compare them ]
                                         
        • verifyArchive()
                                           [ verify all the files in update.zip with digest  listed in
                                          MANIFEST.MF ]
                                 

                               
      • find_update_script():install.c
                                [ find META-INF/com/google/android/update-script updater script ]
                               
      • handle_update_script():install.c
                                [ read cmds from script file, and do parser, exec ]
                               
        • parseAmendScript():amend.c
                                           [ call yyparse() to parse to command ]
                                         
        • exeCommandList():install.c
                                         
          • exeCommand():execute.c
                                                     [ call command hook function ]
                                           

                                 

                       

             

           
  • erase
            DATA/CACHE partition
           
  • prompt_and_wait():recovery.c
             [ wait for user input: 1) reboot 2) update.zip 3) wipe data ]
           
    • ui_key_xxx
                      get ALT+x keys
                     
    • 1)
                      do nothing
                     
    • 2)
                      install_package('SDCARD:update.zip')
                     
    • 3)
                      erase_root() →
                      format_root_device()   DATA/CACHE
             

           
  • may_install_firmware_update():firmware.c
             [ remember_firmware_update() is called by write_hboot/radio_image
            command, it stores the bootloader image to CACHE partition, and
            write update-hboot/radio command to MISC partition for bootloader
            message to let bootloader update itself after reboot ]
           
    • set_bootloader_message()
                     
    • write_update_for_bootloader():bootloader.c
                      [ write firmware image into CACHE partition with update_header,
                      busyimage and failimage ]
             

           
  • finish_recovery():recovery.c
             [ clear the recovery command and prepare to boot a (hopefully
            working) system, copy our log file to cache as well (for the system
            to read), and record any intent we were asked to communicate back to
            the system. ]
           
  • reboot()

Recovery模式流程图
以下流程图绘制了系统从启动加载bootloader后的行为流程。
Android recovery 模式 中英文对照_第1张图片
Android recovery 模式 中英文对照_第2张图片
Android recovery 模式 中英文对照_第3张图片
               

 

 WIPE 清除手机的信息 就是格式化 然后你在刷你喜欢的ROM。

5、Wipe——清除
5-1、Wipe data/factory reset——清除内存数据和缓存数据
5-2、Wipe Dalvik-cache——清除缓存数据 + ext 分区内数据
5-3、Wipe SD:ext partition——只清除ext 分区内数据
5-4、Wipe battery stats——清除电池数据
5-5、Wipe rotate settings——清除传感器内设置的数据

分区
6、Partition sdcard——分区sd 卡
6-1、Partition SD——自动为sd 卡分区
6-2、Repair SD:ext——修复ext 分区
6-3、SD:ext2 to ext3——将ext2 分区转换为ext3 分区(推荐)
6-4、SD:ext3 to ext4——将ext3 分区转换为ext4 分区(C4 卡不推荐,C6 卡推荐)

想多了解 请看下面:

1、Reboot system now——重启

2、USB-MS toggle——在recovery 模式下直接连接USB,读取你的sd卡,这个非常方便。刷不成的话你还可以往sd卡拷贝别的ROM 进行补救,按小房子退出该模式。非常棒的功能,最近才发现的。2010.05.27.

3、Backup/Restore——备份和还原
3-1、Nand backup——Nand 备份
3-2、Nand + ext backup——Nand 备份(系统和ext 分区一同备份)
3-3、Nand restore——还原(就是还原3-1、3-2 的最后一次备份)
3-4、BART backup——BART 备份 (包括系统和ext 分区)
3-5、BART restore——还原最后一次的BART备份

Nand 备份类似于系统的备份 而BART 则像是PC 上ghost 的备份。
Nand 备份 它不会备份ext 分区(就是第二分区 没有分区的可以不管这个)
所以你的如果app2sd 了 那么装在第二分区的程序用Nand 恢复是办不到的
BAR T则可以备份到ext 分区 用BART 恢复则可以恢复整个系统 可以使它和你备份前一模一样,不会有一点文件信息的丢失(包括联系人、短信、图片、影音等,所以如果你装的东西比较多,那么备份和恢复会比较慢)

4、Flash zip from sdcard——从sd卡根目录的.zip ROM 刷机包刷机

5、Wipe——清除
5-1、Wipe data/factory reset——清除内存数据和缓存数据
5-2、Wipe Dalvik-cache——清除缓存数据 + ext 分区内数据
5-3、Wipe SD:ext partition——只清除ext 分区内数据
5-4、Wipe battery stats——清除电池数据
5-5、Wipe rotate settings——清除传感器内设置的数据

6、Partition sdcard——分区sd 卡
6-1、Partition SD——自动为sd 卡分区
6-2、Repair SD:ext——修复ext 分区
6-3、SD:ext2 to ext3——将ext2 分区转换为ext3 分区(推荐)
6-4、SD:ext3 to ext4——将ext3 分区转换为ext4 分区(C4 卡不推荐,C6 卡推荐)

7、Other——其它
7-1、Fix apk uid mismatches——修复apk 程序
7-2、Move apps+dalv to SD——移动程序和虚拟缓存到sd 卡(这个可不是 app2sd)
7-3、Move recovery.log to SD——移动刷机日志文件到sd 卡(执行此操作后,sd 卡根目录会出现一个“recovery.log” 文件 即为刷机日志文件)

8、Power off——关机


更多相关文章

  1. Android系统启动流程 -4
  2. android基础知识15:获得android系统信息04—ActivityManager
  3. android 5.0系统 EditText控件
  4. Android属性系统
  5. Android系统启动,用过安卓手机的都知道,你还不知道吗?
  6. 通过 Android SDK Manager 安装面向 Android* 模拟器插件的英特

随机推荐

  1. 性能优化之Java(Android)代码优化
  2. android HAL简记
  3. 关于Android分辨率的支持
  4. Android简明开发教程九:创建应用程序框架
  5. Android中的文件权限操作
  6. Android(安卓)控件一 TextView
  7. Android(安卓)AVD Manager无法识别真机,ad
  8. Android(安卓)P 中的新文本特性
  9. Android(安卓)判断网络状态,并且在没有网
  10. Android(安卓)控件二 Button